Learn the principles behind site management decisions, then practise applying them. Choose a topic for clear notes, a worked example and questions that explain every answer.
21 topics91 practice questionsFree revision notes
About these independent revision materials
These original notes and practice questions support your taught course and current delegate materials. They are not official CITB examination questions, an exam prediction or a substitute for course attendance. The safety guidance here is for Great Britain; Northern Ireland has separate legislation. Examples are fictional learning situations.
Reviewed against the linked primary sources on 12 November 2026. The questions test understanding; they do not claim an official topic weighting or examination format.
What do you want to revise?
Open a topic for the notes, a worked example and practice questions. Use the mixed practice set when you want to combine topics.
No topics match. Clear the filters or try another word.
Health and safety law and CDM duties
Distinguish legal duties, management job titles and the purpose of enforcement notices.
5 practice questionsConstruction planning and Plan, Do, Check, Act
Explain how a construction phase plan becomes a working management system.
4 practice questionsRisk assessment, controls and method statements
Explain hazard, risk, the control hierarchy and how to review a task method.
4 practice questionsCompetence, induction and worker engagement
Match training and supervision to the task, and check whether safety information is understood.
5 practice questionsInspection, audit, investigation and RIDDOR
Use monitoring to prevent harm and separate internal learning from statutory reporting.
5 practice questionsCOSHH, dust, fumes and lead
Explain exposure routes and choose controls that fit the substance and process.
5 practice questionsAsbestos information and training limits
Choose the information needed before work disturbs a building and recognise the limits of awareness training.
4 practice questionsNoise and vibration: values, exposure and controls
Distinguish action values from limits and understand why duration and the actual equipment matter.
5 practice questionsManual handling and work design
Assess the whole handling operation and explain why weight alone is not enough.
4 practice questionsWelfare, fatigue, stress and wellbeing
Plan usable welfare and recognise how work organisation affects health and performance.
4 practice questionsWork at height, access and fall protection
Apply the work-at-height hierarchy and distinguish prevention, restraint and arrest.
5 practice questionsSite layout, traffic and mobile plant
Reduce vehicle–pedestrian conflict through layout, movement planning and suitable mobile equipment.
4 practice questionsLifting operations and equipment examinations
Separate lift planning, ongoing condition checks and thorough examination.
4 practice questionsWork equipment, guards and safe maintenance
Explain PUWER suitability, guarding and the difference between stopping and safe isolation.
4 practice questionsElectrical safety and buried or overhead services
Use service information and competent electrical arrangements without treating plans or switches as proof of safety.
4 practice questionsExcavation planning, support and inspections
Identify the information and changing conditions that determine excavation safety.
4 practice questionsTemporary works, demolition and structural stability
Manage temporary structures and demolition as planned sequences with controlled changes.
4 practice questionsConfined-space recognition, entry and rescue
Recognise a confined-space risk and explain why entry and rescue require planned specialist arrangements.
4 practice questionsFire prevention and emergency planning
Connect ignition and fuel control with escape, warnings and a workable emergency response.
5 practice questionsEnvironmental controls, waste and pollution
Plan materials and drainage to prevent pollution and manage waste responsibly.
4 practice questionsLone work, out-of-hours tasks and driving
Assess what changes when a worker is separated from help or travelling for work.
4 practice questionsMixed practice
1. Health and safety law and CDM duties
Distinguish legal duties, management job titles and the purpose of enforcement notices.
5 practice questions
- Distinguish legal duties, management job titles and the purpose of enforcement notices.
- Explain the worked example and check your understanding with the questions.
The Health and Safety at Work etc Act 1974 sets the general framework for workplace health and safety in Great Britain. Employers have duties towards employees and people affected by their work. Employees also have responsibilities: taking reasonable care and cooperating with their employer are part of safe working. A business does not remove its duties by buying an insurance policy or appointing an adviser. [1]
CDM 2015 adds construction-specific responsibilities. The commercial client arranges suitable management, time, resources and appointments. Designers consider foreseeable risks in their designs. Where more than one contractor is involved, the principal designer coordinates health and safety in the pre-construction phase; the principal contractor coordinates it during construction. Contractors still manage their own work. A site manager often implements these arrangements, but that job title does not automatically identify the statutory dutyholder. Ask which organisation holds the duty and what authority has been delegated. [2]
An improvement notice concerns a legal breach that is continuing or likely to recur and sets a period for remedy. A prohibition notice addresses an activity involving a risk of serious personal injury; it can take effect immediately or at a specified later time. An injury does not have to happen first. Knowing the distinction helps you recognise why an unsafe activity cannot be justified by a promised future fix. [3]
These legal notes concern Great Britain. Northern Ireland has its own framework, including CDM (Northern Ireland) 2016. Apply the rules for the project location. [4]
Criminal enforcement and civil compensation are different routes. A regulator can act on a legal breach; an affected person may pursue compensation through civil law. Paying an insurance claim does not itself resolve the preventive duty. Relevant duties also apply to self-employed people, and employees must take reasonable care and cooperate with necessary safety arrangements. [5] [6]
Key points to remember
- A job title and a statutory dutyholder role are different things.
- The principal contractor coordinates construction-phase interfaces between contractors.
- A prohibition notice does not require an accident to have occurred.
Know these terms
- Dutyholder
- A person or organisation on whom the applicable law places a responsibility.
- Principal contractor
- The appointed contractor coordinating the construction phase on a project involving more than one contractor.
Two contractors, one interface
A fit-out contractor needs ceiling access while another installs services below it. Both say their own method is safe.
Why it matters: The contractors must coordinate their work, and the principal contractor must manage the construction-phase interface. The manager should resolve the sequence and shared controls through those arrangements. Checking two separate documents cannot prove the simultaneous operation is safe.
Common misunderstanding: The site manager personally becomes every CDM dutyholder.
Remember: Establish the actual appointments and delegated tasks. Several organisations retain their own duties.
Recall it without looking
Say or write your answer first, then open the explanation.
Who coordinates construction-phase health and safety on a multi-contractor project?
The principal contractor, working with the contractors and other dutyholders; each contractor still manages the work under its control.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: The principal contractor. CDM allocates roles by their responsibilities and appointments, not by who arrives first.
- The principal designer alone — The principal designer coordinates the pre-construction phase and liaises with the principal contractor.
- The client’s insurer — Insurance does not perform the statutory coordination role.
- Whichever contractor starts first — Start order does not define the appointment or duty.
- The principal contractor — Correct: construction-phase coordination is a principal contractor duty.
Show answer and explanation
Answer: It does not, by itself, establish the CDM dutyholder appointment. A manager can carry out tasks for a dutyholder without replacing that dutyholder.
- It transfers all contractor duties to the individual — Contractors retain duties for their work.
- It removes the need for organisational capability — The organisation still needs the capability and resources for its role.
- It automatically makes the manager the commercial client — The client is the party for whom the project is carried out, not a title assigned to a site employee.
- It does not, by itself, establish the CDM dutyholder appointment — Correct: identify the appointed party and delegated authority.
Show answer and explanation
Answer: A hazardous activity creates a risk of serious personal injury. Prohibition focuses on preventing a dangerous activity, not waiting for harm.
- A routine improvement is preferred but no relevant risk exists — The prohibition criterion concerns serious personal injury risk.
- A hazardous activity creates a risk of serious personal injury — Correct: the notice can prevent the activity continuing before anyone is injured.
- An accident has already happened, regardless of continuing risk — An accident is not required and does not alone explain the prohibition power.
- A breach needs remedy but does not involve the serious-injury risk described — That may be relevant to an improvement notice; it does not explain the immediate prohibition criterion.
Show answer and explanation
Answer: Allow suitable time and resources, Make appropriate dutyholder appointments. Client arrangements enable safe delivery; they do not erase the roles of designers and contractors.
- Allow suitable time and resources — Correct: suitable project arrangements include time and resources.
- Make appropriate dutyholder appointments — Correct: the client must arrange relevant appointments.
- Personally carry out every scaffold inspection — Inspection requires suitable arrangements and competence; it is not a universal personal client task.
- Approve a generic plan and then stop checking the appointed dutyholders — Client duties include suitable arrangements and checking the relevant dutyholders carry out their duties.
Show answer and explanation
Answer: A regulator can enforce a breach while an affected person may separately claim compensation. Understand the purpose of each route rather than assuming that payment resolves prevention or enforcement.
- A civil compensation claim and criminal enforcement are the same process — They are separate legal routes with different purposes.
- Only criminal law can apply after a workplace injury — Civil compensation can also be relevant.
- A regulator can enforce a breach while an affected person may separately claim compensation — Correct: both routes can be relevant and are not interchangeable.
- Payment by an insurer removes every preventive duty — Compensation does not itself discharge health and safety duties.
2. Construction planning and Plan, Do, Check, Act
Explain how a construction phase plan becomes a working management system.
4 practice questions
- Explain how a construction phase plan becomes a working management system.
- Explain the worked example and check your understanding with the questions.
A construction phase plan (CPP) sets out how health and safety will be managed during the work. It is required before the construction phase of every construction project, including work that is not notifiable. The principal contractor prepares it on a multi-contractor project; the sole contractor does so on a single-contractor project. Its detail should fit the work. A short project still needs usable arrangements, not a large borrowed document with irrelevant sections. [7]
Think of the CPP as project coordination: access, welfare, emergency arrangements, interfaces, responsibilities and rules. A task method explains how a particular job is carried out. The health and safety file has a different purpose again: information needed for later work on the structure. Copying a method into a folder does not settle how several contractors will share a work area. [2] [8]
Plan, Do, Check, Act describes a continuing management cycle. Plan identifies priorities, controls and ownership. Do provides resources, competence and implementation. Check compares what actually happens with the intended arrangement. Act uses the findings to correct problems and improve the system. A signed policy is a statement of intent; it is not evidence that a barrier was installed or an action completed. [9]
A practical management note names the decision, responsible person, deadline and verification. For example: move the delivery slot before scaffold dismantling starts, notify both contractors, inspect the separated area and confirm the new route. This makes an assumption visible and gives the manager something observable to check.
Turn the plan into decisions people can follow
A useful CPP connects the project programme with the conditions needed for work to happen. For each significant interface, ask what must be ready, who will arrange it, who needs the information and how the arrangement will be checked. Put the project-wide decision in the CPP and related coordination arrangements; put the detailed task sequence in the relevant contractor's method. The two must agree. Repeating the same vague instruction in both documents does not make it more effective. [7] [8]
Worked reasoning: the next phase changes access
In this fictional planning exercise, façade repairs and deliveries were programmed for different days. A delay now puts them together beside the only pedestrian entrance. Both contractors have current methods, but neither addresses the new overlap.
- Plan: identify the shared area and everyone affected. Compare resequencing with a suitably assessed alternative access arrangement. Agree who makes the coordination decision before accepting the revised programme.
- Do: provide the chosen resources and physical arrangements, update the relevant information and brief both teams and incoming drivers.
- Check: observe the entrance during the actual delivery period. A photograph of an empty route before the shift does not show whether the arrangement works when people and vehicles arrive.
- Act: if people still have to improvise a route, resolve the cause and revise the arrangement. Assign and verify the corrective action instead of recording the same observation each day.
For revision, a useful action record would name the access problem, the agreed change, its owner, the time it must be ready and the evidence needed to close it. The owner may coordinate specialist input rather than personally design the solution. A revised drawing is evidence of a proposed arrangement; checking the installed arrangement and communicating it complete different parts of the job. [9]
Key points to remember
- A CPP is required for every construction project.
- Project coordination, task methods and the health and safety file serve different purposes.
- Checking implementation is part of management, not an optional final stage.
Know these terms
- CPP
- Construction phase plan: the project’s construction-phase health and safety arrangements.
- Verification
- Checking evidence that an intended action or control actually works.
A plan that stops at the drawing
A revised plan shows a new pedestrian route, but deliveries have already started and no barriers have moved.
Why it matters: The planning stage has changed but implementation has not. The manager needs an owner and resources for the physical change, instructions for affected users and a check before relying on the route. Circulating the drawing alone does not complete the management cycle.
Common misunderstanding: Only projects notified to HSE need a CPP.
Remember: Notification thresholds and the requirement for a CPP are different tests. Every construction project requires a proportionate plan.
Recall it without looking
Say or write your answer first, then open the explanation.
Give one example of Check and one of Act.
Check: observe whether deliveries follow the agreed separation. Act: change the arrangement and close the cause of repeated pedestrian diversions.
Two current contractor methods are individually suitable, but their activities now overlap. What should the manager resolve before accepting the revised programme?
Identify the shared space, timing and people exposed; agree a coordinated sequence or suitable separation; establish responsibilities and resources; update and brief the affected arrangements; and verify that they work. The missing decision concerns the interface between the methods, not whether each has a signature.
A photograph shows the new pedestrian route before deliveries begin. What further evidence would make the Check stage meaningful?
Observe the route under the conditions it was designed for: deliveries, pedestrian use and any adjacent work. Check that access remains available and people understand it. Compare those observations with the planned arrangement and assign action where they differ.
Improve the action “access to be sorted” without inventing a technical design.
State the affected location and conflict, identify who will coordinate the decision and any competent input, set when the arrangement must be ready, name the people to brief and specify how completion will be verified. Keep any unresolved design or suitability decision open until the appropriate person resolves it.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: A proportionate CPP is still required. Small scale changes the appropriate detail, not the existence of the planning duty.
- Only an insurer can decide — The construction planning requirement is not an insurance option.
- It can be written after all work ends — It must support planning before the construction phase, then remain useful.
- A proportionate CPP is still required — Correct: the CPP requirement applies to every construction project.
- No CPP is required — Notification and planning are separate requirements.
Show answer and explanation
Answer: Observing whether people use the protected route. A check compares actual behaviour and conditions with what the plan intended.
- Choosing a new approach after a recurring failure — That is acting on findings.
- Writing a policy statement — That establishes intent within planning.
- Ordering barriers — That helps resource implementation.
- Observing whether people use the protected route — Correct: this tests the control in real conditions.
Show answer and explanation
Answer: Owner, agreed action, due time and evidence of completion. Specific ownership prevents an open concern being mistaken for a completed control.
- Discuss access sometime — There is no owner, deadline or verifiable action.
- Access issue noted — This records a concern but not its resolution.
- Owner, agreed action, due time and evidence of completion — Correct: these make action and verification traceable.
- All staff are responsible — Shared awareness does not identify who will deliver the specific change.
Show answer and explanation
Answer: A method statement describes the sequence for particular work, The CPP coordinates site-wide construction arrangements. Different documents contribute different information; their presence alone is not coordination.
- A method statement describes the sequence for particular work — Correct: it explains the task’s planned execution.
- A health and safety file is just another name for every method statement — Its purpose is relevant information for later work on the structure.
- A folder of RAMS automatically resolves contractor interfaces — Interfaces still require active coordination.
- The CPP coordinates site-wide construction arrangements — Correct: it addresses the project’s management arrangements.
3. Risk assessment, controls and method statements
Explain hazard, risk, the control hierarchy and how to review a task method.
4 practice questions
- Explain hazard, risk, the control hierarchy and how to review a task method.
- Explain the worked example and check your understanding with the questions.
A hazard is something capable of causing harm. Risk combines the likelihood of harm with its possible severity. A blade is a hazard; risk depends on matters such as access to it, the work, who is exposed and the safeguards. An assessment identifies hazards, people affected, existing controls and further action. It must include non-routine work and people beyond the immediate crew, such as cleaners or visitors. [10]
Start with prevention: can the task or hazardous material be removed, replaced or redesigned? Engineering and collective controls reduce reliance on repeated individual decisions. Procedures, training and PPE remain important but should not become an automatic first answer when a more effective control is practicable. A safety talk about falling objects cannot perform the job of separating people from the danger area. [11] [12]
A method statement translates the chosen controls into a workable sequence. Read it against today’s location, equipment, competence, neighbouring activities and emergency arrangements. A generic signature page does not reveal a missing interface. Likewise, a permit-to-work system controls authorisation and coordination for specified work; it does not replace assessment or make the underlying task safe by itself. [8]
Review when the work or assumptions change, controls fail, or experience reveals a gap. Waiting until an annual review date is wrong if the material or method changes today. In the review, identify exactly what changed and what decision is needed; this is more useful than repeatedly writing “RAMS to be updated”.
Review a method by following the work
Read a proposed method as though the team is moving through the task. At each stage, identify who could be harmed, what prevents the harm and whether that measure can actually be provided. Include setup, normal work, interruptions, cleaning and handover. A list of hazards is incomplete if it never explains how the controls fit into the sequence. [10] [8]
- Match: does the method describe this task, location, equipment and surrounding activity?
- Challenge: has avoiding the hazard or changing the process been considered before relying on individual protection?
- Resource: are the necessary people, competence, equipment and space available?
- Verify: what must be checked before starting, and how will control failures be recognised?
- Review: who deals with a change, and how does the revised decision reach the people doing the work?
Worked reasoning: a control that is only a sentence
A contractor's fictional method says “keep other trades clear” during overhead installation. Another team must use the area below to reach its workplace. The hazard is falling material; the risk includes injury to people who need that route. The phrase has not established a workable exclusion or alternative access.
A stronger review asks whether the activities can be separated in time, or whether a suitable protected arrangement can be provided through competent planning. It establishes the work boundary, access arrangements, person coordinating the interface and checks before and during the task. The manager should be able to explain why the chosen arrangement addresses the exposed people. Extra PPE or a second signature does not answer the unresolved access question. [11]
Residual risk is the risk with the actual controls in place. Do not lower a score because a proposed barrier has been written into the assessment but has not yet been installed. If a control cannot be delivered, revisit the method and decision; a reassuring number cannot make the missing measure real.
Key points to remember
- Hazard describes potential harm; risk considers likelihood and severity.
- Prefer eliminating or reducing exposure at source before relying on PPE.
- A changed process can require immediate review even when the document is in date.
Know these terms
- Residual risk
- Risk remaining after the specified controls are in place.
- RAMS
- Common shorthand for risk assessments and method statements; the documents have related but different jobs.
The same paint, a different process
A contractor switches from brushing a coating to spraying it in a smaller room. The product is unchanged.
Why it matters: The process and exposure conditions have changed. Spraying can alter airborne exposure, ventilation needs, ignition risks and who is affected. The product sheet is an input; it cannot establish that the previous task controls fit the new work. Review the actual application before authorising it.
Common misunderstanding: A signed assessment is proof that the task is safe.
Remember: It records a decision; its assumptions, implementation and effectiveness must match the real task.
Recall it without looking
Say or write your answer first, then open the explanation.
Why is a method statement different from a risk assessment?
The assessment identifies harm and controls; the method explains the planned sequence for applying those controls to the work.
A method says “exclude other trades”, but another trade must cross the work area. Name the decisions missing from the method.
It needs a workable sequence or separation, the affected boundaries and access route, coordination with the other trade, responsibility for implementing the arrangement, and checks that it remains effective. First consider whether the overlap can be avoided. Repeating the exclusion instruction does not solve the conflicting access need.
A risk assessment rates the residual risk as low because a barrier is planned. The barrier is unavailable. Can the work be accepted on that rating?
No. The rating depends on a control that is not present. Establish a suitable alternative or revise the work through the appropriate assessment and coordination process. The manager must verify actual controls before relying on the residual-risk conclusion.
The main operation is well controlled, but the method ends before cleaning and handover. What should your review ask?
Ask who performs those stages, who else is present, what hazards remain or are created, what controls and equipment are needed, and who confirms the area is suitable for its next use. A safe production step does not establish that the full operation has been assessed.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: The chance and seriousness of injury from contact with an exposed conductor. Risk describes possible harm in context, not just the object or substance.
- A moving vehicle — That identifies a source of potential harm.
- A damaged cable — That is a source of potential harm.
- A solvent — That identifies a hazardous substance.
- The chance and seriousness of injury from contact with an exposed conductor — Correct: it considers likelihood and consequences.
Show answer and explanation
Answer: Supply suitable components cut to the required size off site. Planning procurement can prevent exposure before work starts, provided the supplied components suit the job.
- Supply suitable components cut to the required size off site — Correct: this can eliminate that site cutting operation; remaining risks still need assessment.
- Print a larger dust warning sign — A sign communicates risk but does not remove the source.
- Use the same saw for a longer shift — This may increase exposure.
- Use an appropriate respirator while carrying out the same cutting task — Respiratory protection can reduce inhalation exposure when properly selected and used, but does not remove the dust-generating operation.
Show answer and explanation
Answer: It has not assessed and coordinated the affected interface. The question is whether the method works safely in its actual surroundings.
- It has not assessed and coordinated the affected interface — Correct: the work may expose people outside the author’s crew.
- Every method must have identical headings — A prescribed appearance does not prove suitability.
- The document needs a second signature only — A signature alone cannot supply missing controls.
- The assessment has not yet reached its scheduled annual review — The missing interface needs attention now; the calendar date is not the key defect.
Show answer and explanation
Answer: A new substance changes the exposure, Workers report that the extraction fails during use. Review is responsive to changed risk and control performance, as well as planned intervals.
- The assessment was signed by everyone yesterday — Recent signatures do not themselves change risk or prove a need for review; changed hazards or control failure do.
- The task is unchanged and the verified controls remain effective — These facts do not themselves identify a new review trigger.
- A new substance changes the exposure — Correct: assessment assumptions may no longer hold.
- Workers report that the extraction fails during use — Correct: ineffective controls require investigation and action.
4. Competence, induction and worker engagement
Match training and supervision to the task, and check whether safety information is understood.
5 practice questions
- Match training and supervision to the task, and check whether safety information is understood.
- Explain the worked example and check your understanding with the questions.
Competence is specific to the work: relevant skills, knowledge, training and experience must fit the task, with suitable organisational capability where needed. A card or certificate is evidence to consider, not a universal licence to operate every machine or supervise every specialist activity. Equipment training may be provided in house when it is suitable; its quality and relevance matter more than the label alone. [14]
Induction explains the arrangements for this site: routes, restricted areas, welfare, emergency signals, reporting, significant risks and relevant rules. It must suit the person’s role and needs. Visitors may need a proportionate briefing and escort; workers need the information required for their activities. A returning worker may still need an update when the layout or risks change. [15]
Communication has a receiver. Use clear language, suitable translations or visual demonstrations where appropriate, then ask people to describe or show the important steps. “Do you understand?” often produces a nod without revealing uncertainty. A useful check asks, for example, where a delivery driver waits or how a worker reports a failed control. [15]
Leadership affects whether concerns are raised early. Invite workers to identify practical obstacles and involve them in finding workable controls. Consultation is a two-way process: explaining an already fixed decision is not the same as listening before it is finalised. Supervisory arrangements should reflect experience, complexity and risk; an unfamiliar task may need closer support even for an experienced worker. [16]
Read the meaning as well as the colour
Safety signs communicate a specific message. They support risk controls and do not replace a barrier, safe method or briefing. Read the pictogram and any text, not colour alone. [17]
| Sign family | Typical form | Purpose |
|---|---|---|
| Prohibition | Red ring and diagonal bar | An action must not be taken, such as no unauthorised entry. |
| Warning | Yellow triangle | A hazard requires attention, such as electricity. |
| Mandatory | Blue circle | A specified action is required. |
| Emergency escape or first aid | Green square or rectangle | Locates an escape route or relevant facility. |
| Fire equipment | Red square or rectangle | Locates firefighting equipment. |
Key points to remember
- Competence relates to a task and its conditions.
- Induction is site-specific and must be understood.
- Worker consultation can reveal problems that paperwork misses.
Know these terms
- Induction
- An introduction to the arrangements and significant risks relevant to this site and person.
- Check-back
- Asking someone to explain or demonstrate the important information in their own words.
A familiar machine with a new attachment
An operator is experienced with the base machine but has not used the attachment delivered today.
Why it matters: Assess the additional knowledge and practical skill needed for this configuration. Provide suitable instruction, familiarisation and supervision, and verify capability before use. Experience with the base machine does not establish understanding of the attachment’s different controls or limitations.
Common misunderstanding: A signed attendance sheet proves understanding.
Remember: It records attendance. Use a practical explanation or demonstration to check understanding.
Recall it without looking
Say or write your answer first, then open the explanation.
Give a stronger question than “Do you understand the emergency procedure?”
Ask the person to identify the alarm, their route and assembly point, and explain how they would raise a concern.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: They explain and identify the correct route and restrictions. A check of application is more informative than a record of presence.
- They signed the attendance list — Signing alone does not show the content was understood.
- They explain and identify the correct route and restrictions — Correct: applying the information exposes misunderstandings.
- They own a general safety card — The card does not prove knowledge of today’s layout.
- They stood near the briefing — Presence does not establish comprehension.
Show answer and explanation
Answer: Relevant competence, information and any further training or supervision. The same role can include different tasks requiring different preparation.
- Only the number of years employed — Experience length does not prove task-specific capability.
- That the worker will learn by trial while production continues — Uncontrolled trial is not a suitable competence arrangement.
- That the worker’s general training card is still in date, without checking this equipment — A current card can be evidence, but it does not by itself establish competence with the unfamiliar equipment.
- Relevant competence, information and any further training or supervision — Correct: capability must fit this equipment and task.
Show answer and explanation
Answer: Workers can contribute concerns and practical knowledge before decisions are settled. Workers can help identify how proposed controls will work in real conditions.
- It requires every decision to be unanimous — Consultation does not mean that every decision needs unanimity.
- It consists only of collecting signatures — Signatures do not demonstrate an exchange of views.
- Workers can contribute concerns and practical knowledge before decisions are settled — Correct: consultation involves exchange and consideration.
- It removes the employer’s responsibility — Listening does not transfer legal duties.
Show answer and explanation
Answer: The emergency route changes, A worker is assigned a new activity with different significant risks. Update information when the site, work or people’s relevant information needs change; the question assumes the original induction and understanding were already suitable.
- A duplicate of the unchanged briefing record is saved in the site file — An administrative copy does not change the work, audience or safety arrangements.
- The emergency route changes — Correct: people need the new route information.
- A worker is assigned a new activity with different significant risks — Correct: the changed activity creates new information needs.
- The same team returns after lunch to the unchanged, previously briefed task — No change in work or conditions is described; the facts do not identify a new briefing need.
Show answer and explanation
Answer: A mandatory action is required. Read the pictogram and sign family together; the sign supports the assessed protection arrangements.
- A mandatory action is required — Correct: the sign directs the specified protective action.
- The location of an emergency exit — Escape signs use the emergency-information family, usually green.
- A prohibition on wearing eye protection — Prohibition uses a different sign family and meaning.
- Only that eye injuries have occurred in the past — The sign specifies required behaviour, not incident history.
5. Inspection, audit, investigation and RIDDOR
Use monitoring to prevent harm and separate internal learning from statutory reporting.
5 practice questions
- Use monitoring to prevent harm and separate internal learning from statutory reporting.
- Explain the worked example and check your understanding with the questions.
An inspection examines conditions and controls: for example, whether an access route remains usable. An audit takes a broader look at whether the management system is suitable and being followed, including evidence that inspections lead to completed actions. Both need reliable records. A finding should describe the condition, risk, required action, owner and follow-up; a tick without supporting observation is weak evidence. [9] [8]
After an incident, the priorities include help, preventing further harm and preserving useful information when it is safe to do so. Investigation should look beyond the last action of the person involved. Immediate causes explain what happened; underlying causes can include poor planning, unsuitable equipment, unclear instructions or programme pressure. Corrective action should address those causes and be checked for effectiveness. A near miss can reveal the same failing as an injury event. [18]
RIDDOR is a separate statutory reporting process. In Great Britain, work-related deaths, specified injuries, certain dangerous occurrences, qualifying occupational diseases and other defined events can be reportable. Not every accident or near miss meets the test. The responsible person depends on the circumstances; “site manager” is not automatically the answer. [19]
Most reportable accident and dangerous-occurrence categories require notification without delay and a report within ten days. An over-seven-day worker-incapacity report must be sent as soon as practicable and within fifteen days of the incident; the accident day is excluded from the incapacity count, while weekends and rest days count. Occupational disease reporting follows receipt of the qualifying diagnosis. These are GB rules; use the separate Northern Ireland system where applicable. [20] [19] [21]
Keep different records for their actual purposes. A construction-phase plan describes project arrangements; a scaffold inspection report records an inspection; a lifting thorough-examination report addresses the equipment examined; and a RIDDOR report fulfils a qualifying reporting duty. Some projects also require notification to HSE. Check the applicable requirement and retention arrangements rather than assuming one generic checklist replaces every statutory record. [8]
Classify the event before choosing the reporting route
For a GB RIDDOR decision, record the event, whether it arose from work, the person's status, the injury or diagnosis and any period during which normal duties could not be performed. Check the relevant category with the responsible person. Do not use the number of days off as the first and only test: a specified injury has its own reporting route. [19]
Worked reasoning: two injuries, different tests
In the first fictional case, an employee sustains a doctor-confirmed wrist fracture in a work-related accident. That falls within the specified-fracture category; the responsible person should not wait to see whether absence exceeds seven days. Follow the notification and reporting requirements for that category. [19] [20]
In the second case, an employee has an otherwise non-specified injury from a work-related accident on a Monday. They remain unable to perform their normal duties from Tuesday through the following Tuesday. The accident Monday is excluded. Tuesday is day one; the weekend still counts; the following Monday is day seven and Tuesday is day eight. This exceeds seven consecutive days, even if some days were rest days or the worker attended for different duties. The reporting deadline is measured from the incident, not from day eight or the eventual return to normal work. [21] [20]
Keep prevention moving while facts are established
A pending diagnosis or reporting decision is not a reason to delay immediate protection or the collection of reliable facts. Record the known information, identify who will obtain what is missing and keep the classification under review. For an internal investigation, distinguish what happened from why the work allowed it to happen. Link each corrective action to a cause and verify the result. A new briefing can address misunderstanding; it cannot by itself provide a missing storage area or repair defective equipment. [18]
Key points to remember
- Investigation, corrective action and statutory reporting are separate tasks.
- A near miss can justify learning even when it is not RIDDOR-reportable.
- Check the actual reporting category, responsible person and deadline.
Know these terms
- Underlying cause
- A system or organisational failing that helped the immediate event occur.
- Dangerous occurrence
- A defined category of serious event under RIDDOR, not a synonym for every near miss.
The repeated blocked walkway
A worker trips after deliveries repeatedly occupy a walkway. The action proposed is “remind staff to look where they walk”.
Why it matters: That response focuses on the final action and misses why materials arrive where people must walk. Examine storage space, delivery planning, route protection, ownership and earlier reports. Then verify the revised arrangement. Decide statutory reporting separately using the injury and work-related facts.
Common misunderstanding: Writing an accident-book entry completes RIDDOR.
Remember: The internal record and statutory notification are different processes.
Common misunderstanding: No injury means no useful investigation.
Remember: A high-potential near miss can reveal a control failure before harm occurs.
Recall it without looking
Say or write your answer first, then open the explanation.
What is one underlying cause of a vehicle–pedestrian near miss?
For example, a delivery schedule and site layout that repeatedly force people into a vehicle route. This goes beyond blaming the last person who stepped there.
A doctor confirms a worker’s wrist fracture after a work-related accident. The worker expects to return tomorrow. Should the responsible person wait for an eight-day absence?
No. The specified-injury category must be considered independently of the over-seven-day incapacity test. The expected return date does not remove that category. Follow its notification and reporting requirements using the confirmed facts.
An otherwise qualifying worker injury occurs on Monday. The worker cannot perform normal duties from Tuesday through the next Tuesday, including the weekend. Count the relevant period.
Exclude the accident Monday. Tuesday is day one, the weekend counts, the following Monday is day seven and the next Tuesday is day eight. The period exceeds seven consecutive days. Use the incident date for the reporting deadline; do not start a new fifteen-day clock on day eight.
An investigation finds repeated walkway obstructions, but the proposed action is a reminder to watch where people walk. What would make the response more useful?
Establish why materials repeatedly occupy the route, including delivery timing, storage, responsibilities and previous unresolved reports. Assign actions addressing those causes and verify the route during the relevant activity. Keep this prevention work separate from deciding whether the particular event meets a RIDDOR category.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: Delivery planning provided no suitable storage area, so routes were repeatedly obstructed. Investigation should identify why the conditions arose, so controls can prevent recurrence.
- A person fell — That describes the event.
- Delivery planning provided no suitable storage area, so routes were repeatedly obstructed — Correct: this is an organisational condition producing repeated exposure.
- The worker sustained a bruise — That is an outcome.
- A worker’s foot contacted a pallet — That describes the immediate contact.
Show answer and explanation
Answer: It can still require internal investigation and corrective action. RIDDOR defines reporting duties; it does not define every event worth learning from.
- It proves the controls worked — Avoiding harm by chance is not proof of effective control.
- It should be recorded as a different event to make it reportable — Records must reflect the facts.
- It can still require internal investigation and corrective action — Correct: prevention does not depend on statutory reportability.
- It must be ignored — A non-reportable event can reveal serious risk.
Show answer and explanation
Answer: Within fifteen days of the incident. Separate the incapacity threshold from the deadline for submitting the report.
- Exactly seven working days after the accident — The incapacity and reporting tests are not this rule.
- Within fifteen days of the incident — Correct: this category has the fifteen-day reporting deadline.
- Within fifteen days of returning to normal work — The deadline runs from the incident, not return.
- Only after the next monthly meeting — A meeting schedule cannot postpone the statutory deadline.
Show answer and explanation
Answer: A named action owner and due date, Evidence that the agreed change was implemented and checked. An action is useful when someone delivers it and its effectiveness can be verified.
- A named action owner and due date — Correct: responsibility and timing make follow-up possible.
- Evidence that the agreed change was implemented and checked — Correct: closure needs more than a promise.
- A tick that every issue was discussed — Discussion alone does not show resolution.
- The phrase “worker error” with no further enquiries — This can conceal preventable planning or system failures.
Show answer and explanation
Answer: The relevant scaffold inspection report and action record. Choose a record by its actual purpose and check that it relates to the equipment, event and time in question.
- The construction phase plan alone — It describes project arrangements, not that specific inspection finding.
- The relevant scaffold inspection report and action record — Correct: these document the inspection and any defects or corrective action.
- A training attendance register alone — It records attendance, not the scaffold condition after the event.
- The delivery booking sheet alone — It may help explain the event but is not the inspection record.
Primary guidance for this topic: [9] [8] [18] [20] [19] [21]
6. COSHH, dust, fumes and lead
Explain exposure routes and choose controls that fit the substance and process.
5 practice questions
- Explain exposure routes and choose controls that fit the substance and process.
- Explain the worked example and check your understanding with the questions.
Hazardous substances include more than labelled containers. Cutting creates dust; welding creates fumes; mixing or applying products can release vapours or mist. Exposure can occur by breathing, skin or eye contact, swallowing contamination, or entry through damaged skin. A COSHH assessment considers the actual substance, process, quantity, duration, people exposed and controls. A safety data sheet supplies information about a product; it is not a completed assessment of your workplace. [13]
Construction dust can damage the lungs. Silica-containing materials, wood and other construction materials produce different dusts; lack of visible dust or immediate symptoms does not establish safe exposure. Consider designing out cutting, ordering suitable sizes or using a less dusty process. Where dust remains, controls may include on-tool extraction or water suppression and suitable respiratory protection where required. Selection, maintenance, training and checking effectiveness all matter. A mask does not repair failed extraction. [22]
Protect the wider work area as well as the operator. For example, an enclosed room may contain another trade, and dusty cleaning can expose people after the main task finishes. Plan storage, cleaning, disposal and emergencies as part of the process. Skin protection and washing arrangements matter where substances can cause dermatitis or burns; preventing inhalation alone may leave other exposure routes open. [13]
Lead is covered by separate lead-at-work requirements. Disturbing old lead coatings, hot cutting or handling contaminated materials can create inhalation and ingestion risks. Dirty hands can transfer lead to food or cigarettes. Identify the material and work, obtain suitable specialist assessment and arrange the required control and health arrangements; ordinary dust precautions are not proof that lead risk is adequately managed. [23]
Where the assessment requires tight-fitting respiratory protective equipment (RPE), arrange a competent face-fit test for the individual wearer and supply the make, model, type and size that achieved a successful fit. A different facepiece cannot be assumed to fit because its protection rating looks similar. The wearer must also put it on correctly and check the fit each time; this user check does not replace the fit test. Hair in the sealing area can prevent a good seal, so consider suitable alternative RPE when a tight face seal cannot be achieved. Check compatibility with other protective equipment and the task. [24]
Separate three kinds of evidence
Checking the control asks whether the intended measure is present and functioning: for example, whether the specified extraction is connected and maintained. Exposure monitoring uses suitable measurements to help establish exposure or control effectiveness. Health surveillance uses appropriate repeated health checks to identify work-related adverse effects where required. They answer different questions. A normal health result does not prove that today's extraction works, and an equipment label does not show what a person inhaled. [13] [25]
Use competent occupational hygiene or health input to decide what measurements or surveillance are needed and interpret the results. Health surveillance is not a general wellbeing check for everybody. Where medical surveillance is required for lead exposure, the appropriate appointed-doctor arrangements matter. The manager should secure the required provision and act on the advice, rather than invent medical thresholds or personally interpret clinical results. [25]
Worked reasoning: a complete cutting method with an incomplete cleanup plan
In this fictional review, the cutting team has suitable extraction and its RPE arrangements have been checked. The method then says “leave tidy”. A different shift is expected to clean the area, but has received no dust-control information. The omission leaves an exposure stage and a group of people outside the plan.
The manager's review should establish the assessed cleaning and waste method, who will do it, their information and equipment, and how the work area is handed over. Check whether the planned control arrangements actually cover that stage. Do not substitute a health questionnaire or a claim that nobody is coughing for a missing exposure-control method. If old coatings may contain lead, establish the material and the relevant lead-specific assessment and health arrangements before assuming the ordinary cutting method covers it. [22] [23]
Key points to remember
- A product sheet is information for an assessment, not the assessment itself.
- Generated dust and fumes can be hazardous even without a product warning label.
- Exposure controls must cover the process, bystanders and cleanup.
Know these terms
- COSHH
- Control of Substances Hazardous to Health: the GB framework for managing many hazardous-substance exposures.
- Exposure route
- How a substance reaches the body, such as inhalation, skin contact or ingestion.
- RPE
- Respiratory protective equipment selected for the wearer, hazard and task.
The task ends but exposure continues
A cutting task uses extraction. At the end of the shift, another worker dry-sweeps the settled dust through an occupied room.
Why it matters: The main cutting control does not cover the entire exposure pathway. The assessment must consider suitable cleaning, people nearby and waste handling. The manager should arrange a cleaning method that avoids unnecessarily dispersing dust and verify that the team knows and can use it.
Common misunderstanding: No warning label means no COSHH risk.
Remember: Work processes can generate harmful substances that were not supplied in a labelled container.
Common misunderstanding: If nobody coughs, the dust control is effective.
Remember: Symptoms and visibility cannot establish adequate control; some harm develops later.
Recall it without looking
Say or write your answer first, then open the explanation.
Why can the same product need a different assessment when sprayed instead of brushed?
The process can change airborne exposure, people affected, ventilation, fire risk and the protection needed.
An extraction maintenance record is current and a worker’s last health check was normal. What do these records fail to establish about today’s task?
Neither alone proves that the actual task controls are suitable and functioning today or that exposure is adequately controlled. Check the process, equipment use, affected people and any required exposure monitoring. Health surveillance and control verification have different purposes.
A dust method names the cutting operator but says nothing about the cleaner on the next shift. What should be added before accepting the complete operation?
The assessed cleaning and waste arrangements, who is exposed, the equipment and instruction needed, coordination with other occupants and a clear handover. The control plan must include later exposure stages as well as the main cutting task.
A subcontractor calls a general annual health questionnaire “lead surveillance”. What should management establish?
Whether the work involves lead exposure and what the competent assessment requires, including any required medical surveillance and appropriate appointed-doctor provision. Verify the relevant arrangements and follow competent advice. The label on a general questionnaire does not establish that the lead-specific requirements are met.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: It provides product information to help assess the actual work. Assessment connects substance information to the real process and people exposed.
- It covers every substance generated by nearby work — Generated dust or fumes may need separate identification.
- It removes the need to consider skin exposure — Skin contact can still be a relevant route.
- It provides product information to help assess the actual work — Correct: it is an input to the workplace assessment.
- It automatically approves every use of the product — Different processes and exposure conditions need consideration.
Show answer and explanation
Answer: Cutting silica-containing material. The substance can be produced by the work itself, so a container-based inventory is incomplete.
- Reviewing a safety data sheet before the operation — That is a planning action; it does not itself generate the hazardous substance.
- Cutting silica-containing material — Correct: the process can generate respirable silica dust.
- Using an unopened sealed product in its original packaging without exposure — The stated facts do not create the generated dust or fume exposure described.
- Moving sealed pre-cut components without cutting or disturbing them — The stated task does not generate cutting dust.
Show answer and explanation
Answer: Ingestion from contamination transferred to food or the mouth. Hygiene arrangements help prevent contamination reaching the mouth as well as managing airborne exposure.
- Ingestion from contamination transferred to food or the mouth — Correct: swallowing contaminated material can lead to absorption.
- Only breathing contaminated air — Inhalation can matter in lead work, but the eating scenario specifically describes a swallowing pathway.
- Only absorption caused by wearing clean gloves — The described concern is contamination transferred to the mouth, not the clean glove itself.
- There is no route once gloves are removed — Removing gloves does not establish that hands are uncontaminated.
Show answer and explanation
Answer: Cleaning and disposal after the main operation, Other trades and people exposed nearby. Assess the whole process, affected people and exposure pathways.
- Cleaning and disposal after the main operation — Correct: later tasks can create further exposure.
- Only whether the dust is easy to see — Visibility is not a sufficient measure of risk or control.
- Only the product label, without examining the work process — A label is information, not the full exposure assessment.
- Other trades and people exposed nearby — Correct: exposure can extend beyond the tool user.
Show answer and explanation
Answer: The new facepiece is suitable for the task and the wearer achieves a successful fit test for it. Fit testing selects a facepiece that fits the individual. Correct fitting and a user check on each use are additional requirements.
- The matching protection rating means the previous fit test automatically covers it — Protection rating does not establish how the different facepiece seals to this wearer.
- The new facepiece is suitable for the task and the wearer achieves a successful fit test for it — Correct: suitability and individual fit both matter; provide the tested make, model, type and size.
- A daily user seal check permanently replaces fit testing — A user check is needed when wearing the mask, but does not replace the individual fit test.
- Select a larger tight-fitting facepiece to accommodate hair beneath the seal — Hair in the sealing area can permit leakage; a larger facepiece does not solve that incompatibility.
7. Asbestos information and training limits
Choose the information needed before work disturbs a building and recognise the limits of awareness training.
4 practice questions
- Choose the information needed before work disturbs a building and recognise the limits of awareness training.
- Explain the worked example and check your understanding with the questions.
Asbestos risk is connected to disturbing asbestos-containing materials and releasing fibres. Before intrusive work, find out whether the information covers the actual areas and materials affected. An asbestos register or report should be read for its scope, exclusions, location information and recommended action. A recent date does not make a report suitable for a different purpose. [26]
A management survey helps manage asbestos during normal occupation and foreseeable maintenance. A refurbishment or demolition survey addresses materials, including hidden materials, in the area affected by intrusive work. The survey must suit the proposed scope. If a wall void is excluded, “no asbestos identified in accessible areas” does not answer what is behind the wall. Resolve that gap before arranging disturbance. [26]
Asbestos awareness training helps people recognise potential risks and avoid disturbing asbestos. It does not train them to sample, remove or work on asbestos. Non-licensed and licensed asbestos work require the appropriate further training, competence and arrangements. Do not use an awareness certificate as the basis for selecting a removal contractor. [27]
A manager should make the relevant information available to those planning and carrying out the work, establish the appropriate specialist arrangements, and explain the procedure if suspect material is encountered. The response must prevent further disturbance and exposure while the material and required action are assessed. Do not ask an untrained worker to break off a sample to settle an uncertainty.
Key points to remember
- Check survey purpose, coverage and exclusions against the planned work.
- Awareness training does not authorise asbestos work.
- Information must reach the people who could disturb the material.
Know these terms
- ACM
- Asbestos-containing material.
- Survey exclusion
- An area or material that the survey did not inspect; it remains an information gap for relevant work.
The uninspected service riser
A report covers accessible rooms but excludes a service riser. The refurbishment requires drilling through that riser.
Why it matters: The relevant risk is unresolved, even if the report is recent and most rooms were clear. The planned intrusive work needs suitable information for that area and any required specialist action. Reusing the general report without resolving the exclusion would treat missing information as a negative finding.
Common misunderstanding: A building survey saying “none found” means every hidden area is clear.
Remember: Read its purpose and exclusions. The statement may only concern inspected areas.
Recall it without looking
Say or write your answer first, then open the explanation.
What can an asbestos-awareness certificate demonstrate, and what can it not demonstrate?
It can evidence awareness training. It cannot establish competence to sample, remove or carry out asbestos work.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: Does it cover the work areas, materials and purpose of the proposed disturbance?. The information must answer the risks created by the actual work.
- Does the report contain any statement that accessible rooms were clear? — A limited finding cannot be assumed to cover hidden or excluded areas.
- Does it cover the work areas, materials and purpose of the proposed disturbance? — Correct: scope and suitability are essential.
- Does the report carry a recent date, regardless of its exclusions? — Recency alone cannot establish coverage of the planned disturbance.
- Was the same report accepted for a different area of the building? — Acceptance for another area does not establish this scope.
Show answer and explanation
Answer: Awareness training supports avoiding disturbance but is not removal training. Match the competence and training to the actual asbestos activity.
- Awareness training alone qualifies a worker to remove asbestos — Awareness does not provide asbestos-work competence.
- Awareness training supports avoiding disturbance but is not removal training — Correct: asbestos work needs appropriate additional arrangements.
- Every asbestos task is covered by a general SMSTS certificate — A management course does not establish specialist task competence.
- No further checks are needed if a contractor has any training certificate — Check relevance, competence and the type of work.
Show answer and explanation
Answer: The information gap must be resolved for the proposed work. Uninspected areas require an appropriate information and control decision before disturbance.
- The information gap must be resolved for the proposed work — Correct: planned disturbance needs suitable information.
- The oldest worker should identify the material visually — Visual familiarity is not a suitable substitute for required assessment.
- The work may proceed because adjacent rooms were surveyed — Adjacent findings do not establish the excluded area.
- The void has been confirmed free from asbestos — Exclusion means it was not covered, not that it was clear.
Show answer and explanation
Answer: Give relevant survey information to those planning and doing the work, Brief the procedure for unexpected suspect material. Useful information and a clear response procedure support prevention; neither permits untrained asbestos work.
- Ask each trade to remove a small sample without further arrangements — Unplanned sampling can create exposure and requires competence.
- Treat an old survey as universal approval for all future alterations — Scope and changing work must be checked.
- Give relevant survey information to those planning and doing the work — Correct: hidden information cannot inform the method.
- Brief the procedure for unexpected suspect material — Correct: the team needs to know how to prevent further disturbance and obtain assessment.
8. Noise and vibration: values, exposure and controls
Distinguish action values from limits and understand why duration and the actual equipment matter.
5 practice questions
- Distinguish action values from limits and understand why duration and the actual equipment matter.
- Explain the worked example and check your understanding with the questions.
Noise can damage hearing and cause tinnitus. Think about reducing noise at source: a quieter method, suitable quieter equipment, maintenance or separation can reduce exposure before personal hearing protection is added. Assessment must consider the actual work and time exposed; a machine’s catalogue figure is not automatically the worker’s daily exposure. [28] [29] [30]
For GB daily or weekly noise exposure, the lower action value is 80 dB(A), the upper action value is 85 dB(A), and the exposure limit value is 87 dB(A). The limit takes account of hearing protection; action values are assessed without its reduction. Peak sound pressure also has separate values. These numbers trigger different duties and are not a suggestion to work up to a limit. Suitable assessment, controls, information, protection and health surveillance depend on the circumstances. [28] [29] [30]
Hand-arm vibration can damage nerves, circulation and joints. Tingling, numbness or fingers going white are concerns to report early, not signs to wait for before controlling exposure. The GB daily hand-arm vibration action value is 2.5 m/s² A(8); the limit is 5 m/s² A(8). A(8) expresses exposure normalised to an eight-hour reference period: it is not the same as using a tool for eight hours. [31] [32] [33]
Exposure depends on vibration magnitude and the time actually exposed across the relevant tools. A lower-vibration tool used much longer may not reduce daily exposure as expected. Plan the operation, use representative information, maintain tools and limit exposure appropriately. Health surveillance can identify early effects for relevant risks, but does not replace controlling the exposure. [25]
Keep the noise measurements separate
| Value | Daily or weekly exposure | Peak sound pressure |
|---|---|---|
| Lower action value | 80 dB(A) | 135 dB(C) |
| Upper action value | 85 dB(A) | 137 dB(C) |
| Limit value | 87 dB(A) | 140 dB(C) |
The daily or weekly measurement and peak measurement answer different questions. Hearing-protection reduction is considered for the limit values, not the action values. Weekly averaging is permitted in the circumstances specified by the regulation; it is not an automatic choice for every task. [30]
Key points to remember
- Action values trigger action; they are not safe targets.
- Noise exposure depends on level and duration.
- Vibration exposure includes contributing tools and actual exposure time.
Know these terms
- dB(A)
- An A-weighted decibel measure used for noise exposure.
- A(8)
- Daily vibration exposure expressed over an eight-hour reference period.
- Health surveillance
- Checks intended to detect early work-related ill health for relevant risks.
A quieter tool used for longer
A replacement breaker has a lower declared vibration magnitude, but its slower performance doubles the expected exposure time.
Why it matters: The daily exposure needs assessment using appropriate data and the revised duration. Choosing the lower declared figure alone is not enough. Compare the entire operation, including alternative methods, actual use and maintenance, then verify the assumptions in practice.
Common misunderstanding: Below the exposure limit means no action is needed.
Remember: Action values and other duties can require controls before the limit is reached.
Common misunderstanding: Shift length is the same as vibration trigger time.
Remember: Exposure time concerns actual vibration exposure, not simply hours on site.
Recall it without looking
Say or write your answer first, then open the explanation.
What do the hand-arm vibration values 2.5 and 5 m/s² A(8) represent?
Respectively the daily exposure action value and exposure limit value in Great Britain; neither is a universal safe tool-use time.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: 85 dB(A). Keep the upper action value separate from the noise exposure limit.
- 85 dB(A) — Correct: 85 dB(A) is the upper action value.
- 87 dB(A) — That is the exposure limit value, allowing for hearing protection.
- 80 dB(A) — That is the lower noise action value, not the upper action value.
- 90 dB(A) — This is not the current upper action value in the GB regulations.
Show answer and explanation
Answer: The daily exposure action value. The value relates to daily vibration exposure, combining magnitude and duration.
- The daily hand-arm vibration exposure limit value — The limit is 5 m/s² A(8), not 2.5.
- A universal safe exposure for exactly eight hours on every tool — A(8) is a normalised exposure measure, not a universal tool timer.
- A vibration level measured at one instant without considering duration — A(8) is a daily exposure measure that incorporates exposure time.
- The daily exposure action value — Correct: it is the action value for daily exposure.
Show answer and explanation
Answer: Longer use and actual operating conditions may change total exposure. Select equipment by its performance in the planned operation and verify exposure assumptions.
- Vibration matters only after symptoms appear — Control should prevent harm rather than wait for it.
- The manufacturer’s lower emission figure guarantees the daily exposure is below the action value — Daily exposure also depends on the actual operation, duration and other vibrating tools used.
- Longer use and actual operating conditions may change total exposure — Correct: the daily result depends on more than the quoted magnitude.
- New tools can never reduce risk — Suitable equipment can reduce risk; it still needs assessment.
Show answer and explanation
Answer: Reduce exposure through suitable methods and equipment, Arrange relevant health surveillance without treating it as a substitute for control. Control exposure proactively and use health arrangements to support, not replace, prevention.
- Assume protection removes every need to assess exposure — Assessment and effective source controls still matter.
- Reduce exposure through suitable methods and equipment — Correct: address the source and operation.
- Arrange relevant health surveillance without treating it as a substitute for control — Correct: surveillance and prevention have different roles.
- Wait for permanent symptoms before changing the work — This misses the preventive purpose.
Show answer and explanation
Answer: Consider it for limit values, but not for lower or upper action values. Do not use hearing-protection reduction to make an action-value duty disappear.
- Deduct it for both action values and limits — The regulation distinguishes these tests.
- Ignore it for both action values and limits — The limit test does take the reduction into account.
- Deduct it only when choosing a tool, never when assessing exposure — This is not the rule for applying the values.
- Consider it for limit values, but not for lower or upper action values — Correct: this is the distinction in regulation 4.
Primary guidance for this topic: [28] [31] [25] [30] [29] [32] [33]
9. Manual handling and work design
Assess the whole handling operation and explain why weight alone is not enough.
4 practice questions
- Assess the whole handling operation and explain why weight alone is not enough.
- Explain the worked example and check your understanding with the questions.
Manual handling includes lifting, lowering, carrying, pushing and pulling. The first planning question is whether a hazardous handling operation can be avoided. Delivery location, component size, mechanical assistance and sequence can prevent a difficult movement from becoming part of the job. Training in lifting technique is useful but cannot correct an operation that is fundamentally unsuitable. [34]
Where hazardous handling remains, consider the task, individual capability, load and environment. Frequency, reach, twisting, carrying distance, grip, stability, visibility, floor condition and available space can matter as much as mass. A bulky lightweight board can obstruct vision or be difficult to control outdoors. A small load repeatedly moved at arm’s length can create strain over time. [34]
A mechanical aid must fit the route and load. A trolley may reduce carrying but introduce pushing, pulling, slopes, pinch points or a need to restrain the load. Confirm suitable equipment, access and competence before choosing the aid. Changing where materials arrive can sometimes achieve more than asking the workforce to lift differently. [12]
There is no single legal maximum lifting weight that makes every operation safe. A team lift also needs assessment: load sharing may be uneven, people must coordinate, and the route can restrict movement. Involve the people doing the work and review arrangements if packages, storage height, frequency or personnel change. A recorded assessment should make the important assumptions visible.
Key points to remember
- Avoid hazardous handling where practicable before assessing what remains.
- Consider task, individual, load and environment together.
- A trolley changes the handling risks; it does not automatically remove them.
Know these terms
- Manual handling
- Moving or supporting a load using bodily force, including pushing and pulling.
- Ergonomics
- Designing work and equipment to fit people and reduce avoidable strain.
Delivery to the wrong floor
Boxes arrive at ground level and must be repeatedly carried upstairs. The proposed control is a lifting-technique talk.
Why it matters: First review whether delivery, storage or suitable mechanical movement can avoid the repeated carry. If handling remains, assess the load, stairs, frequency, people and rest of the operation. The talk may support the eventual method but cannot remove the stair-carry exposure by itself.
Common misunderstanding: Any load below a remembered weight is safe.
Remember: Weight is one factor; posture, frequency, distance, grip and the person can change risk substantially.
Recall it without looking
Say or write your answer first, then open the explanation.
Name four features besides weight that can change handling risk.
For example, carrying distance, frequency, twisting or reach, and floor condition. Grip, load stability and individual capability also matter.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: Whether the handling can be avoided through work design or suitable assistance. Planning the supply and movement of materials can avoid exposure before it reaches the crew.
- Which poster should be placed nearby — A poster does not redesign the operation.
- How quickly the strongest worker can finish it — Speed and perceived strength do not complete an assessment.
- Whether the boxes look familiar — Familiarity does not establish acceptable risk.
- Whether the handling can be avoided through work design or suitable assistance — Correct: prevention comes before relying on technique.
Show answer and explanation
Answer: Its suitability depends on the load, route and operation. An aid should be assessed as part of the whole operation, not treated as an automatic solution.
- It can always carry any load that fits physically — Capacity, stability and intended use must be considered.
- Using it means no instruction is needed — Users still need suitable information and competence.
- It removes every manual-handling risk — Pushing and pulling are also manual handling.
- Its suitability depends on the load, route and operation — Correct: slopes, surfaces, control and capacity still matter.
Show answer and explanation
Answer: It can obstruct vision, be hard to grip and react to wind. A complete assessment looks beyond the number on the label.
- A weight label addresses the whole task — It supplies one piece of information.
- It can obstruct vision, be hard to grip and react to wind — Correct: size and control can create risk independently of weight.
- Only heavy loads can cause injury — This ignores posture, reach, visibility and control.
- Light objects cannot affect balance — Bulk and movement can affect balance.
Show answer and explanation
Answer: The carrying route gains a staircase, The frequency of lifts increases substantially. Review when the factors that determine risk change, not only on a calendar date.
- The carrying route gains a staircase — Correct: the task and environment changed.
- The frequency of lifts increases substantially — Correct: repeated exposure changed.
- The same worker continues the same load, route and frequency with verified effective controls — No changed risk factor or ineffective control is described.
- An unchanged task remains within the existing review schedule and no new concern has arisen — These facts do not themselves identify an additional review trigger; scheduled reviews still apply.
10. Welfare, fatigue, stress and wellbeing
Plan usable welfare and recognise how work organisation affects health and performance.
4 practice questions
- Plan usable welfare and recognise how work organisation affects health and performance.
- Explain the worked example and check your understanding with the questions.
Construction welfare includes toilets, washing, drinking water, changing and rest arrangements appropriate to the work. It needs to be available from the start and maintained throughout the project. Plan access, capacity, cleaning, replenishment and faults. A facility on a drawing is not sufficient if it is locked during the shift or cannot be reached safely. Contractors provide suitable welfare for their workers; the principal contractor coordinates provision on a multi-contractor site and the client must ensure arrangements are made. [35]
Occupational health management also addresses how work is organised. Fatigue can be affected by long shifts, insufficient recovery, demanding work and travel. A manager should examine schedules and workload when planning an evening or extended shift, including whether supervision, lighting, welfare and emergency cover remain available. An instruction to “stay alert” cannot provide missing recovery time. [36] [37]
HSE’s stress Management Standards cover demands, control, support, relationships, role and change. These are useful prompts for identifying work-related pressures: impossible workloads, conflicting instructions or badly communicated changes can be addressed through management action. Consult workers, identify causes and agree practical improvements. A wellbeing poster alone does not reduce an unachievable workload. [38]
Concerns about mental health, drugs or alcohol need a respectful, consistent response under the employer’s arrangements. Address immediate safety and offer appropriate support; a change in behaviour is not proof of a diagnosis or substance misuse. Keep personal information appropriately restricted and use qualified support for health decisions. [39]
Key points to remember
- Welfare must work for the actual shifts and workforce.
- Fatigue and stress can have causes in workload and work organisation.
- Observe facts and address safety without guessing a medical diagnosis.
Know these terms
- Welfare
- Facilities and arrangements supporting basic needs such as washing, drinking, changing and rest.
- Work-related stressor
- An aspect of work design or organisation that can contribute to harmful pressure.
The evening shift loses its facilities
A project extends into the evening, but the welfare cabin and first-aid arrangements finish at the normal closing time.
Why it matters: The altered shift needs its own workable arrangements. Resolve access to suitable welfare and emergency support, then check workload, fatigue, lighting and supervision. The daytime plan does not automatically cover the extended operating period.
Common misunderstanding: A small or short job is exempt from welfare planning.
Remember: Suitable arrangements are still needed; the provision should fit the work and workforce.
Recall it without looking
Say or write your answer first, then open the explanation.
Name three management changes that could reduce work-related stress.
For example, make workloads achievable, clarify conflicting roles, and provide support and clear communication during changes.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: The only washing facility is locked while the evening crew is working. Welfare is about actual access and suitability throughout the work.
- Cleaning and fault reporting have named owners — This supports maintenance.
- Capacity is reviewed when the workforce increases — This is a useful planning check.
- Suitable facilities remain accessible, supplied and maintained for all working shifts — This describes an arrangement that supports the actual work.
- The only washing facility is locked while the evening crew is working — Correct: listed provision is not usable provision.
Show answer and explanation
Answer: Review role clarity, workload and management priorities with the workers. Support is useful, but management must also examine preventable causes in the work.
- Increase every deadline’s urgency — That can intensify the pressure.
- Review role clarity, workload and management priorities with the workers — Correct: this acts on the work design.
- Only display a positive-thinking poster — That does not resolve conflicting demands.
- Assume every complaint is a personal weakness — This discourages reporting and misses organisational causes.
Show answer and explanation
Answer: Record observable concerns, address immediate safety and use the employer’s support process. Respond to the facts and use competent health or employment support where needed.
- Record observable concerns, address immediate safety and use the employer’s support process — Correct: it avoids unsupported diagnosis while dealing with risk.
- Announce a diagnosis to the whole crew — A manager should not invent a diagnosis or disclose personal information widely.
- Assume alcohol is the only possible cause — Many factors can affect behaviour.
- Ignore the concern until an accident happens — An immediate safety concern deserves appropriate action.
Show answer and explanation
Answer: Fatigue, supervision and suitable lighting, Availability of welfare and emergency support. Time of work can change the people, support and conditions around the task.
- Fatigue, supervision and suitable lighting — Correct: the operating conditions have changed.
- Only the date printed on the original method — The actual conditions are more important than the printed date alone.
- Nothing if the tools are unchanged — Unchanged tools do not mean unchanged risk.
- Availability of welfare and emergency support — Correct: daytime arrangements may no longer operate.
11. Work at height, access and fall protection
Apply the work-at-height hierarchy and distinguish prevention, restraint and arrest.
5 practice questions
- Apply the work-at-height hierarchy and distinguish prevention, restraint and arrest.
- Explain the worked example and check your understanding with the questions.
Work at height includes a place where a fall could cause injury; it is not restricted to work above two metres. The planning order is to avoid work at height where practicable, prevent falls where it cannot be avoided, and reduce the distance and consequences of any remaining fall risk. Consider collective protection, such as suitable guardrails, before protection that depends on each person connecting equipment correctly. [11]
Access equipment must suit the task, duration, loads, ground or supporting conditions and environment. A ladder is not automatically prohibited, but it should only be chosen when the assessment justifies its use for the task; short duration alone does not settle all the risks. Plan safe access and movement, fragile surfaces, openings, falling objects and effects on people below. [40] [41]
Scaffolds require suitable design, erection, alteration and inspection arrangements. HSE guidance calls for competent inspection after installation and before first use, at intervals not exceeding seven days, and after circumstances that could jeopardise safety. Competence must match the scaffold’s type and complexity. An inspection record from before a damaging event cannot establish its condition afterwards. Unauthorised alterations can invalidate the arrangement. [42]
Work restraint prevents a person reaching a fall position. Fall arrest acts after a fall begins and therefore requires suitable anchors, compatibility, clearance and a planned rescue. A harness by itself is not a complete system. Management planning must make the rescue practicable with appropriate people and equipment; relying only on calling emergency services does not establish a suitable rescue arrangement. [11]
A protected platform can prevent a fall without each worker attaching a personal system. Restraint is a personal prevention measure; arrest limits a fall after it begins. These are different positions in the hierarchy, so a question about preventing a fall should not be answered as though arrest stops the person reaching the edge. [43] [44]
Choose access by the work it must support
The equipment decision follows the task and hierarchy, not what happens to be available. Establish the working position, reach, duration, tools and materials, supporting conditions and people below. Include getting to and from the working position and any rescue needed. Compare the options before settling the method. [11] [43]
- Ladder or stepladder: justify it through the assessed risk and conditions of use. A short task is not automatically a suitable ladder task, especially if the working position cannot be maintained safely.
- Tower or scaffold platform: establish suitability for the work, space and loads, together with competent assembly or erection, inspection and safe access. A platform is not ready merely because its components have arrived.
- MEWP: select a suitable machine for the task and location, with competent use and workable emergency arrangements. Its reach alone does not answer every suitability question.
- Personal fall protection: explain why higher levels of protection are not reasonably practicable and identify the complete system. A harness on an equipment list does not establish anchors, clearance, compatibility or rescue.
These are comparison prompts rather than instructions for erecting or operating access equipment. Use the relevant competent planning and equipment information. [41] [42] [44]
Worked reasoning: an inspection platform becomes a storage area
A scaffold was arranged for inspection work. A later team proposes storing its materials on the platform to save handling time. An in-date inspection report does not establish that the new loading and use fit the scaffold's design. The manager should identify the proposed change, obtain the scaffold provider's competent assessment and coordinate any necessary alterations and inspection before relying on the new arrangement. The same principle applies when proposed sheeting or other additions change the assumptions used for the scaffold. [42]
For a model revision answer, explain both the potential benefit and the unresolved risk. Moving materials closer may reduce carrying, but that improvement cannot justify an unverified platform load. Management must resolve the interaction between controls, rather than treating improvement in one risk as approval of the whole change.
Key points to remember
- Avoid height, prevent falls, then minimise remaining consequences.
- Collective protection generally protects everyone using the area.
- A harness requires a suitable system and rescue arrangements.
Know these terms
- Work restraint
- A system preventing the user from reaching a position where a fall could occur.
- Fall arrest
- A system intended to stop a fall after it has started.
- Collective protection
- Protection that works for more than one person without each repeatedly taking a specific protective action.
The open edge and the available harness
An open-edge task is planned using a harness because one is already in the store. No anchor or rescue arrangement has been selected.
Why it matters: Start with whether height can be avoided or a suitable protected working platform provided. If personal fall protection is needed, the system requires a suitable design, equipment, anchors, competent use and rescue. Availability of a harness is not a reason to skip the hierarchy or the rest of the system.
Common misunderstanding: Work below two metres cannot be work at height.
Remember: The relevant issue is a fall liable to cause injury, not a universal two-metre threshold.
Common misunderstanding: Any harness prevents a fall.
Remember: A restraint system and an arrest system perform different functions; suitability depends on the full arrangement.
Recall it without looking
Say or write your answer first, then open the explanation.
How does restraint differ from arrest?
Restraint prevents reaching the fall position. Arrest stops a fall after it starts, so clearance and rescue are essential considerations.
A contractor selects a ladder because each fitting takes only a few minutes. What else should a reasoned selection explain?
Whether height can be avoided, the task risk, working position and reach, the tools and materials, stability and access, and whether equipment offering greater protection is justified. Short duration is one consideration; it does not prove that this task can be performed safely from a ladder.
A scaffold has a current inspection report. A new trade wants to add stored materials and sheeting. Why is checking the date alone insufficient?
The proposed use and loading may differ from the design assumptions, and sheeting can affect the arrangement. Obtain the appropriate scaffold design or provider input, establish any required changes and inspection, and communicate the accepted conditions. The report does not approve every future alteration.
A protected roof edge is present, but the route crosses fragile rooflights. What has the proposed access method failed to address?
It has considered falling from the perimeter without resolving the fall-through hazard on the access route. The competent plan must address the entire journey and working place, including fragile areas, suitable prevention and any remaining rescue needs. Edge protection alone does not make every surface safe to cross.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: A suitable method that avoids the need to work at height. The planning hierarchy starts with avoiding exposure before selecting fall protection.
- The fastest ladder already on site — Availability and speed do not establish suitability.
- A suitable method that avoids the need to work at height — Correct: avoidance is the first stage of the hierarchy.
- The cheapest available harness — Equipment price does not determine the hierarchy.
- A warning to take care near the edge — A warning does not prevent a fall.
Show answer and explanation
Answer: Prevent the user reaching a position from which they could fall. Understand the system’s function before judging whether it suits the work.
- Prevent the user reaching a position from which they could fall — Correct: restraint prevents access to the fall position.
- Stop a fall only after it begins — That describes fall arrest.
- Replace every edge barrier automatically — Selection must follow the hierarchy and actual assessment.
- Make any anchor suitable — Anchor suitability remains essential.
Show answer and explanation
Answer: Its condition after impact requires competent assessment before affected use resumes. Inspection intervals do not remove the need to respond to events that may jeopardise safety.
- Its condition after impact requires competent assessment before affected use resumes — Correct: the earlier record does not cover later damage.
- Any worker can straighten it and sign the tag — Alteration and inspection require appropriate competence.
- The tag is more reliable than visible damage — Current condition must be addressed.
- The seven-day date means it can continue unchanged — A relevant event can require inspection sooner.
Show answer and explanation
Answer: Suitable anchors, compatibility and sufficient clearance, A practicable rescue arrangement. Personal fall protection requires the complete system and response, not a single item of PPE.
- Only whether a harness is available — Availability alone does not establish a safe system.
- Assuming emergency services alone are the rescue plan — Management needs suitable planned rescue arrangements.
- Suitable anchors, compatibility and sufficient clearance — Correct: the complete system must function in the location.
- A practicable rescue arrangement — Correct: arresting the fall is not the end of the emergency.
Show answer and explanation
Answer: A suitable restraint system that prevents reaching the edge. The distinction is about what the system physically does, not whether the worker is wearing a harness.
- A fall-arrest lanyard with sufficient clearance — This limits a fall after it begins.
- A rescue kit ready for a suspended casualty — That supports rescue after an event.
- A suitable restraint system that prevents reaching the edge — Correct: restraint prevents the user reaching the fall position.
- An emergency-service contact number — A number alone does not prevent or arrest a fall.
Primary guidance for this topic: [11] [42] [40] [41] [44] [43]
12. Site layout, traffic and mobile plant
Reduce vehicle–pedestrian conflict through layout, movement planning and suitable mobile equipment.
4 practice questions
- Reduce vehicle–pedestrian conflict through layout, movement planning and suitable mobile equipment.
- Explain the worked example and check your understanding with the questions.
Site layout determines many later risks. Plan access, boundaries, storage, pedestrian routes, vehicle routes, unloading, welfare and emergency access together. A route must be suitable for the people or vehicles using it, including visitors and drivers unfamiliar with the site. Storage that blocks a walkway can force an unplanned interface with plant. [45]
Keep pedestrians and vehicles apart where possible and reduce unnecessary movements. Delivery timing, one-way arrangements and suitable turning areas can reduce reversing and congestion. Where crossing or reversing cannot be avoided, assess visibility, separation, signals and the competence of anyone directing movements. High-visibility clothing helps someone be seen; it does not remove a blind spot or replace a suitable route. [45]
Mobile plant needs equipment and people suited to the work: appropriate controls, visibility, protection from overturning or falling objects where required, maintained condition and competent authorised use. Check the operating surface, slopes, loads and attachments against the machine’s capabilities and planned method. A machine arriving from a hire company still needs checks for this task and site. [12]
Consider the whole movement, not just arrival at the gate. Who confirms the route is clear, where does the driver wait, how does unloading interact with nearby trades, and what stops unauthorised people entering the danger area? A change in delivery time can conflict with overhead work even if the route itself is unchanged. Coordinate the change and verify the physical arrangement before relying on it.
Key points to remember
- Layout and sequencing can remove conflicts before warning people about them.
- High-visibility clothing does not replace suitable separation.
- Mobile equipment must suit the ground, attachment, load and operator.
Know these terms
- Segregation
- Keeping people and vehicle movements apart through suitable layout or physical measures.
- Interface
- A point where activities, routes or organisations interact and can affect one another.
Unloading overlaps another trade
A lorry arrives late, when a team is working above the proposed unloading area. Its booking originally assumed the team would be elsewhere.
Why it matters: The original timing assumption has failed. Compare resequencing or a suitable alternative location, then coordinate access restrictions and the unloading method with both parties. A driver briefing supports those controls but cannot remove the overhead-work conflict by itself.
Common misunderstanding: A banksman makes any reversing arrangement safe.
Remember: Avoid or reduce reversing first. Where direction is used, the whole arrangement and competence still need assessment.
Recall it without looking
Say or write your answer first, then open the explanation.
Name two planning choices that can reduce reversing exposure.
For example, a suitable one-way route or turning area, and delivery planning that avoids congested or obstructed manoeuvres.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: Redesign the route or delivery sequence so the movements are separated. Controls that remove or separate the conflicting activities reduce reliance on constant vigilance.
- Redesign the route or delivery sequence so the movements are separated — Correct: it acts on the interaction itself.
- Issue brighter vests while leaving the route blocked — Visibility alone does not resolve the route conflict.
- Tell pedestrians to move faster — This leaves them exposed to the same vehicle movement.
- Remove the incident-reporting box — Suppressing reports does not remove risk.
Show answer and explanation
Answer: Ownership does not establish suitability for the ground, attachment or work. Check what the equipment will do and the conditions in which it will work.
- Hire equipment is always defective — That is an unsupported generalisation.
- A hire agreement replaces operator competence — The operator still needs appropriate competence.
- The machine can be used beyond its limits if the hire period is short — Duration does not authorise unsuitable use.
- Ownership does not establish suitability for the ground, attachment or work — Correct: actual conditions and use determine suitability.
Show answer and explanation
Answer: People may be diverted into a vehicle area outside the agreed separation. A control must remain usable in real conditions; a blocked route is not working separation.
- It is acceptable if the blockage lasts less than an hour — A short duration does not remove the exposure.
- A driver’s horn provides the same protection as a suitable route — A warning is not equivalent to segregation.
- People may be diverted into a vehicle area outside the agreed separation — Correct: the intended route no longer functions.
- Only the appearance of the storage area matters — The issue is safe movement, not appearance.
Show answer and explanation
Answer: Ground conditions, slopes and the intended load, Operator competence and visibility. Mobile plant safety combines equipment, people and the operating environment.
- Only whether the engine starts — Starting does not establish condition or task suitability.
- Ground conditions, slopes and the intended load — Correct: these affect stability and suitability.
- Operator competence and visibility — Correct: the user and ability to see the operating area matter.
- Only whether the machine was used on another project last week — Past use does not establish suitability or condition for this site.
13. Lifting operations and equipment examinations
Separate lift planning, ongoing condition checks and thorough examination.
4 practice questions
- Separate lift planning, ongoing condition checks and thorough examination.
- Explain the worked example and check your understanding with the questions.
LOLER concerns lifting operations and lifting equipment. Every lifting operation needs planning by a competent person, appropriate supervision and safe execution. The detail depends on complexity and risk. A repeated simple lift may have established arrangements; a complex lift needs more extensive planning. The manager must ensure suitable people and resources are available and coordinate neighbouring activities, without assuming a management qualification makes them the lift planner. [46]
Planning considers the load, equipment and accessories, positioning, ground or supporting conditions, travel path, people exposed and foreseeable changes. A lift plan for a known load does not automatically cover a heavier load, different radius, different attachment or changed location. Establish who can authorise changes and how the operation will be controlled. [46]
Thorough examination is a systematic examination by a competent person with a written report. Unless a competent examination scheme specifies other intervals, regular examination is at six months for equipment used to lift people and lifting accessories, and twelve months for other lifting equipment. Relevant installation and exceptional events can also require examination. These intervals do not replace pre-use checks, maintenance or action on defects. [47]
A current report records a finding at a point in time. It cannot prove an accessory is safe after new damage. Check the identity, purpose, capacity and condition of the actual item, and ensure defects prevent inappropriate use. Treat examination, maintenance and operational checking as complementary activities, each with a different purpose.
Key points to remember
- Lifts require competent planning, appropriate supervision and safe execution.
- Routine examination intervals are subject to a competent examination scheme and other triggers.
- A current examination report does not override later damage.
Know these terms
- LOLER
- Lifting Operations and Lifting Equipment Regulations 1998 in Great Britain.
- Thorough examination
- A detailed examination by a competent person, with the required written report.
- Lifting accessory
- Equipment connecting a load to lifting machinery, such as a sling or shackle.
A sling with fresh damage
A sling’s thorough examination is in date, but a worker notices fresh damage while preparing the lift.
Why it matters: The current condition must be dealt with. Prevent use of the affected item and arrange the appropriate competent assessment or replacement through the lifting arrangements. The report does not approve damage that occurred later, and the site manager should not improvise a repair or accessory substitution.
Common misunderstanding: An in-date examination certificate makes every lift safe.
Remember: The operation still needs suitable planning, people, equipment, conditions and checks.
Recall it without looking
Say or write your answer first, then open the explanation.
What are the usual six- and twelve-month LOLER intervals for?
Six months for lifting accessories and equipment lifting people, twelve months for other lifting equipment, unless a competent examination scheme sets different intervals; other examination triggers still apply.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: Ensure competent planning, resources and coordination without exceeding their own competence. Management responsibility includes arranging specialist competence, not pretending it is unnecessary.
- Select all lifting accessories from memory because they hold SMSTS — SMSTS alone does not establish specialist lifting competence.
- Treat the crane’s arrival as proof of a complete plan — Equipment availability is not planning.
- Leave every neighbouring trade to decide independently — Interfaces need coordination.
- Ensure competent planning, resources and coordination without exceeding their own competence — Correct: management must provide the arrangements and resolve interfaces.
Show answer and explanation
Answer: Every six months. Keep the regular interval distinct from additional checks and event-triggered examination.
- Only when first bought — Ongoing deterioration and other triggers require attention.
- Only after an injury — Examination is preventive.
- Every six months — Correct: this is the specified regular interval for lifting accessories.
- Every twelve months in every case — Twelve months generally concerns other lifting equipment, not all accessories.
Show answer and explanation
Answer: The defect must be addressed before the item is used. Historical evidence and current condition must both be considered.
- A photograph of the certificate is enough — Documentation is not a repair or condition assessment.
- The defect must be addressed before the item is used — Correct: the present condition cannot be ignored.
- The report cancels the visible defect — It cannot establish condition after new damage.
- The lift may continue if it is the final one — Schedule position does not make damaged equipment suitable.
Show answer and explanation
Answer: A different load or lifting radius, Changed ground or supporting conditions. The plan must match the actual load, equipment and conditions of the lift.
- A different load or lifting radius — Correct: these can affect capacity and the method.
- Changed ground or supporting conditions — Correct: stability and support assumptions can change.
- A different shift supervisor, with the same verified operation and competent team — A change of name alone does not establish a changed lifting assumption, though handover and competence must remain suitable.
- A replacement document copy containing the same accepted arrangements — A duplicate copy does not itself change the lift.
14. Work equipment, guards and safe maintenance
Explain PUWER suitability, guarding and the difference between stopping and safe isolation.
4 practice questions
- Explain PUWER suitability, guarding and the difference between stopping and safe isolation.
- Explain the worked example and check your understanding with the questions.
PUWER applies to work equipment and to those who provide, control or use it. Equipment must be suitable for its intended task, maintained in a safe condition and used by people with adequate information, instruction and training. The duties can apply to equipment an employer’s staff use even when another business owns it. A new machine is not automatically suitable for every environment or attachment. [12]
Protective measures can include guards, interlocks, emergency stops, controls and means of isolation. These do different jobs. A guard prevents access to danger; an emergency stop helps stop a developing emergency. Neither a skilled operator nor a promise to keep hands clear is equivalent to a missing guard. Check the intended protection rather than accepting a workaround that defeats it. [12]
Maintenance introduces different risks from normal operation. Energy can remain in electricity, pressure, springs, raised loads or moving parts after the normal control is switched off. Safe work therefore needs suitable isolation, prevention of unintended restart and control of stored energy, implemented by competent people using the relevant procedure. A stop button is not automatically an isolator. [48]
Management should plan maintenance time, access, competence and handover. Defect reporting must lead to action: label or otherwise control unavailable equipment, prevent unauthorised reuse and establish who confirms return to service. Keep appropriate inspection and maintenance records, but verify the actual equipment and protective measures. Paperwork alone cannot reveal damage that arose after the last check.
Key points to remember
- Suitability, condition and user competence must all match the task.
- Emergency stopping and safe isolation are different functions.
- Maintenance planning must consider stored energy and unintended restart.
Know these terms
- PUWER
- Provision and Use of Work Equipment Regulations 1998 in Great Britain.
- Interlock
- A protective arrangement linking access or another condition to machine operation.
- Stored energy
- Energy remaining in a system, such as pressure, a spring or a raised component.
The jammed machine
A machine jams. The operator presses stop and proposes reaching inside to free the material while someone stands at the control.
Why it matters: Normal stopping does not establish safe maintenance conditions. The relevant competent isolation procedure must control power, unintended restart and stored energy before access. The manager’s task is to arrange and verify that process, not to improvise an isolation method for equipment they do not understand.
Common misunderstanding: Pressing stop is the same as isolating the machine.
Remember: It may stop normal movement without disconnecting energy or preventing restart.
Recall it without looking
Say or write your answer first, then open the explanation.
Name two forms of stored energy besides electricity.
For example, hydraulic or pneumatic pressure, a compressed spring, a rotating flywheel or a raised load.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: Suitable equipment must also be maintained and used by adequately trained people. Equipment safety combines its selection, condition, safeguards and competent use.
- A new machine needs no task assessment — It may be unsuitable for the intended use or environment.
- A pre-use visual check alone proves all maintenance requirements are met — Pre-use checks and planned maintenance serve different purposes.
- Suitable equipment must also be maintained and used by adequately trained people — Correct: suitability alone is not the whole requirement.
- Hiring it transfers every duty away from the user’s employer — Use and control still create responsibilities.
Show answer and explanation
Answer: Energy may remain and restart may still be possible. Stopping movement and making maintenance access safe are different decisions.
- Stored energy exists only in electrical equipment — Pressure, springs and gravity can also store energy.
- Energy may remain and restart may still be possible — Correct: safe isolation must address the relevant energy sources and restart risks.
- Emergency stops are never useful — They have an important emergency function but not every isolation function.
- A warning label removes the need for isolation — Labels do not control energy.
Show answer and explanation
Answer: The protective function is missing and the affected use must not continue on that promise. Correct the failed protective arrangement through the appropriate competent process.
- The protective function is missing and the affected use must not continue on that promise — Correct: personal care is not equivalent to the guard.
- Experience replaces the protective device — Even experienced people can contact a danger zone.
- The last few items are exempt from guarding — Production quantity does not restore protection.
- Signing the method statement replaces the guard — A signature cannot physically prevent access.
Show answer and explanation
Answer: Provide competent people, suitable access and a controlled handover, Prevent unintended restart and control stored energy. Maintenance needs its own controlled arrangements, not a production shortcut.
- Provide competent people, suitable access and a controlled handover — Correct: these support a safe maintenance process.
- Assume normal production instructions cover every repair — Maintenance can create different risks.
- Return equipment to service whenever the shift ends — Return requires the appropriate confirmation, not a calendar trigger.
- Prevent unintended restart and control stored energy — Correct: maintenance exposes people to energy hazards.
15. Electrical safety and buried or overhead services
Use service information and competent electrical arrangements without treating plans or switches as proof of safety.
4 practice questions
- Use service information and competent electrical arrangements without treating plans or switches as proof of safety.
- Explain the worked example and check your understanding with the questions.
Electrical danger includes shock, burns, fire and effects of arcing. Work on or near electrical systems needs suitable planning and competence. Management must arrange appropriate equipment, protection, inspection, maintenance and safe isolation. A damaged lead or enclosure needs action even if a previous inspection label remains current. Ordinary switching off is not proof that all relevant energy has been isolated. [48] [12]
For buried services, use planning, service plans, locating equipment and safe digging practices together. Plans can indicate likely locations but may be incomplete or inaccurate; a line on a drawing does not establish exact position or depth. Competent locating and the agreed safe system remain necessary. Identification must include services owned by others, not only the main utility. [49]
Overhead electrical lines can cause danger without direct contact because electricity can arc across a gap. Assess the full movement envelope of cranes, excavators, tipper bodies, platforms and long materials. Liaise with the line owner and establish appropriate avoidance or protection arrangements. Never invent a universal clearance from memory or assume a line on wooden poles is a telephone line. [50]
The manager should know what information is required, who is competent to resolve it and what prevents work starting on an unverified assumption. This is different from personally testing a circuit or choosing electrical protection without the necessary competence. Clear boundaries help the correct specialist input happen before the programme creates pressure to proceed.
Key points to remember
- Service plans are one part of a safe system, not exact-location proof.
- Overhead line danger can arise from close approach without contact.
- A current label does not override new damage.
Know these terms
- Arcing
- Electrical discharge across a gap, which can cause severe burns or other injury.
- Safe isolation
- A competent process controlling relevant energy and preventing unintended re-energisation for the work.
The plan and the detector disagree
A drawing places a cable outside the excavation, but locating results suggest a service within it.
Why it matters: The conflicting evidence must be resolved through the competent locating and safe-digging arrangements. The drawing is not a reason to disregard current indications. Clarify the service and working method before the affected excavation proceeds; do not guess the depth or identity.
Common misunderstanding: No contact with an overhead line means no electrical danger.
Remember: Close approach can be dangerous because arcing can occur.
Recall it without looking
Say or write your answer first, then open the explanation.
What four elements does HSE identify for work near buried cables?
Planning, use of cable plans, cable locating devices and safe digging practices; they complement each other.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: An information source within a wider locating and safe-digging process. Use several complementary controls rather than relying on a single drawing.
- A replacement for competent planning — The plan is an input to that planning.
- An information source within a wider locating and safe-digging process — Correct: plans help planning but do not establish every exact location.
- Proof of exact cable depth everywhere — Plans may not provide accurate depths or complete locations.
- Permission to ignore detector indications — Conflicting evidence needs resolution.
Show answer and explanation
Answer: Electricity can arc across a gap. Plan the full movement envelope and use the appropriate line-owner and competent arrangements.
- Electricity can arc across a gap — Correct: dangerous close approach can cause flashover.
- Only the height of the crane while parked matters — The full operating movement, not merely its parked position, must be considered.
- Overhead lines are harmless until physically cut — That ignores arcing and contact risks.
- Rubber tyres make every approach safe — Tyres do not justify unsafe proximity.
Show answer and explanation
Answer: The current defect needs action before affected use. Present condition matters alongside records.
- The label authorises use until its expiry — It records an earlier inspection, not future condition.
- Tape applied by any worker always resolves it — Repair needs suitable competence and a valid method.
- A short task removes the risk — Duration alone does not make damaged equipment safe.
- The current defect needs action before affected use — Correct: the previous label cannot establish safety after damage.
Show answer and explanation
Answer: The full reach and movement of plant and long materials, Suitable arrangements agreed with relevant competent people and the line owner. Service risk management depends on verified information and the actual activity.
- A universal distance guessed from a past project — Clearance and precautions depend on the actual line and work.
- Assuming wooden poles always carry communications cables — HSE warns against this assumption.
- The full reach and movement of plant and long materials — Correct: all foreseeable movements matter.
- Suitable arrangements agreed with relevant competent people and the line owner — Correct: site-specific electrical information is needed.
16. Excavation planning, support and inspections
Identify the information and changing conditions that determine excavation safety.
4 practice questions
- Identify the information and changing conditions that determine excavation safety.
- Explain the worked example and check your understanding with the questions.
An excavation can harm people through collapse, falling material, people or plant falling in, water, services, hazardous atmospheres or effects on nearby structures. There is no depth below which every excavation is automatically safe. The ground, loading, water, work and surroundings determine the precautions. Never use a remembered depth as permission to enter unsupported ground. [51]
Before work, obtain relevant information about ground conditions, existing structures, services and water. Plan suitable protection against collapse, safe access, edge protection, material and plant positions, and inspection. The support or battering solution needs appropriate competence and, where required, design. The manager coordinates the information and arrangements; a short revision note cannot select shoring or calculate a safe edge distance. [51] [52]
Support and battering arrangements must be inspected by a competent person at the start of the working shift and after events specified by the applicable requirements, including circumstances likely to affect stability and falls of material. Work must not proceed while conditions are unsafe. Reports and corrective actions need to be available through the site arrangements. A daily check does not give permission to ignore a relevant change later in the shift. [51]
Rain, water ingress, new stockpiles, vehicle movements, vibration or changes to adjacent structures may alter design assumptions. Communicate the exact change and obtain the required inspection or design review. Removing one problem, such as a stockpile, does not prove that remaining water or ground conditions are acceptable. A usable plan explains who can decide on restart and how the decision reaches affected trades.
Use an inspection to make a decision, not just complete a record
A useful inspection record identifies the excavation and time, the condition found, action already taken and any further action needed, together with the required reporting particulars. The manager needs to know whether the affected work can proceed under the accepted arrangements and which issues remain open. An action such as “monitor trench” is unclear unless the relevant competent arrangements establish what is being monitored, by whom and what change requires action. [51]
Worked reasoning: one defect is corrected, two questions remain
Consider a fictional excavation where an inspection records new water ingress, stored materials beyond the agreed loading assumptions and concerns about a nearby wall. The materials are moved. A supervisor then proposes restarting because the visible housekeeping issue has been corrected.
The conclusion is incomplete. Correcting the material storage addresses one observation; it does not establish the effect of water or the adjacent wall on stability. The manager should keep the affected exposure controlled, make the remaining questions explicit and obtain the relevant inspection and design input. Pumping water away is not automatically a complete answer either: the dewatering method and its effect on stability require competent consideration. No safe support arrangement, pumping method or distance from an edge can be selected from this example. [51] [52]
For a model revision answer, separate three decisions: the immediate restriction that prevents exposure; the competent work needed to establish and restore suitable conditions; and the evidence and communication needed before affected work resumes. Record each unresolved item with an owner and status. Close an action because its intended result has been verified, not simply because a person has replied to an email. [9]
Key points to remember
- Depth alone cannot establish that an excavation is safe.
- Plan ground support, services, access, water and neighbouring loads together.
- Inspect and review after relevant changes, not only at the routine time.
Know these terms
- Battering
- Sloping excavation sides to a suitable angle as part of an assessed method.
- Surcharge
- An additional load near an excavation, such as stored material or plant, that can affect stability.
Rain and a new stockpile
After overnight rain, a subcontractor proposes storing blocks beside an excavation outside the loading assumptions of its support design.
Why it matters: Both water and added loading need competent consideration. Prevent the proposed load and affected exposure, arrange inspection and any design review, resolve defects and communicate the accepted arrangements. Yesterday’s signed inspection cannot answer today’s changed assumptions.
Common misunderstanding: An excavation is safe if it is shallower than a fixed depth.
Remember: Collapse and other hazards depend on conditions; there is no universally safe unprotected depth.
Recall it without looking
Say or write your answer first, then open the explanation.
Name three changes that may require an excavation review.
For example, heavy rain or water ingress, new loads near the edge, damage to supports, a fall of material or changed nearby work.
An excavation inspection records water ingress and unsuitable nearby storage. The storage is moved. What still needs resolving before restarting affected work?
The remaining water and stability concerns, and any other open findings, still need competent assessment and the required controls. Check the accepted conditions, relevant inspection or design decision and communication before restart. One completed action does not close a separate unresolved hazard.
A subcontractor proposes pumping out new water and then using the excavation immediately. Why is that decision incomplete?
Removing visible water does not by itself establish stable ground, adequate support or the effect of the pumping process. The relevant competent arrangements must assess the water, dewatering proposal and stability, then verify suitable conditions before affected work resumes.
Improve the inspection follow-up “excavation issue emailed” into a useful management record.
Identify the location and observed condition, immediate restrictions, the person responsible for the next decision, the information or competent assessment needed, and how completion and permission to resume will be communicated. Record unresolved matters separately so an acknowledgement is not mistaken for closure.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: Depth alone cannot show that the excavation is safe. Treat depth as one piece of the risk picture, not a permission rule.
- Depth alone cannot show that the excavation is safe — Correct: conditions and hazards determine the precautions.
- Every excavation below a remembered depth needs no precautions — There is no such universal safe depth.
- Only excavations deeper than a person can collapse — Shallower excavations can also cause serious harm.
- Depth removes the need to locate services — Services can be present at varying depths.
Show answer and explanation
Answer: It can change loading assumptions and stability. Information about adjacent loads belongs in excavation planning and change control.
- It matters only if the stockpile physically touches a support — Adjacent loading can affect stability without direct contact.
- Loads outside the excavation cannot affect it — Nearby surcharge can be important.
- It matters only after a collapse begins — Planning must prevent the unsafe condition.
- It can change loading assumptions and stability — Correct: additional load can affect the sides or support system.
Show answer and explanation
Answer: The affected excavation must be assessed and made safe before work continues. Inspections and action must respond to actual conditions as well as routine timing.
- Workers should enter quickly to remove the material — Unassessed entry can expose them to further collapse.
- The event matters only if someone was struck — A fall of material can reveal instability without injury.
- The earlier record remains sufficient until tomorrow — A relevant event requires reassessment.
- The affected excavation must be assessed and made safe before work continues — Correct: changed conditions cannot be covered by the earlier finding.
Show answer and explanation
Answer: Existing services and ground conditions, Nearby structures, water and anticipated loads. The plan needs the site conditions and interfaces that could affect people in and around the excavation.
- Only whether the operator has worked nearby before — Past familiarity is not complete current information.
- Existing services and ground conditions — Correct: both affect the method and precautions.
- Nearby structures, water and anticipated loads — Correct: these can affect stability and other risks.
- Only the excavator’s current inspection report — That does not establish ground, services, water or structural conditions.
17. Temporary works, demolition and structural stability
Manage temporary structures and demolition as planned sequences with controlled changes.
4 practice questions
- Manage temporary structures and demolition as planned sequences with controlled changes.
- Explain the worked example and check your understanding with the questions.
Temporary works are engineered arrangements that support or protect structures, plant or excavations, or provide access during construction. Examples include formwork, falsework, propping, working platforms, hoardings and excavation support. Temporary does not mean low risk: failure can affect workers, the public and the permanent structure. The arrangement must withstand foreseeable loads and be used for its intended purpose. [52]
Management needs a clear process for identifying the requirement, obtaining design where needed, checking the design appropriately, installing it correctly, inspecting, authorising use, controlling changes and removing it in a safe sequence. HSE describes a suitably authorised temporary works coordinator as an effective way to manage this. The job title alone is not proof of competence, and SMSTS does not qualify someone to design or approve every temporary structure. [52]
Demolition and structural alteration need adequate information and competent planning before work begins. Understand the structure, stability, services, hazardous materials and effects on adjoining buildings. The sequence matters: removing an element can change how loads are carried even if the finished drawing appears straightforward. The principal designer coordinates pre-construction risk work, while the principal contractor manages the construction phase. [53]
Changes must return to the appropriate competent process. A support that obstructs a delivery cannot simply be removed because it is inconvenient. Likewise, additional loading, a different sequence or changed site conditions can require design review. The manager’s contribution is to make assumptions, responsibilities and authorisation clear, and ensure site practice matches the accepted arrangement.
Follow the evidence from the design brief to removal
A temporary-works process should connect the intended use and site conditions to the design, appropriate checking, correct installation and controlled use. The organisation chooses its management arrangements; particular form names or job titles are not universal legal requirements. Where a coordinator is appointed, they need authority as well as competence. [52]
- Define: identify the arrangement, its location, intended function, relevant loads and interfaces. Obtain missing information through the competent design process.
- Prepare: establish the design information and checking appropriate to the work, then make the correct instructions available to those installing it.
- Verify: confirm that the installed arrangement matches the accepted information before it is relied on.
- Control: identify who authorises use and changes under the project procedure. Plan inspection and communicate the conditions of use.
- Remove: use the agreed sequence and competent confirmation that the support is no longer needed; the desired final layout is not proof of stability at every intermediate stage.
Worked reasoning: the wrong revision reaches the workface
In a fictional structural alteration, the design office issues revision B of a support arrangement. The installer still has revision A, while a delivery coordinator assumes the area will be available that afternoon. The manager finds three connected uncertainties: which instruction is current, whether the installation matches it, and whether the delivery can proceed without affecting the support.
A useful register entry identifies the location, relevant design revision, unresolved query, responsible decision-maker and status under the project's procedure. It does not mark the arrangement ready merely because a drawing exists. Resolve the discrepancy through the competent process, verify the accepted arrangement and communicate the resulting restrictions to the affected teams. This exercise is about tracking and authorising a decision; it does not supply a support design or a removal method. [52] [53]
Key points to remember
- Temporary structures must suit foreseeable loads and their intended use.
- Installation, use, modification and removal all need control.
- A planned final structure does not prove every intermediate demolition stage is stable.
Know these terms
- Falsework
- Temporary support used while a permanent structure is being formed or constructed.
- Temporary works coordinator
- A person given suitable authority to coordinate the temporary-works management process within the project’s arrangements.
A prop blocks the delivery route
A prop installed for an alteration obstructs a planned material movement. A contractor suggests removing it for ten minutes.
Why it matters: The prop’s temporary removal is a change to the structural arrangement. The relevant competent design and management process must assess it and authorise a suitable alternative if one exists. The short duration and delivery pressure do not prove stability during the gap.
Common misunderstanding: Temporary support may be altered by any experienced trade.
Remember: Changes can affect load paths and stability; use the competent design and authorisation arrangements.
Recall it without looking
Say or write your answer first, then open the explanation.
Why must demolition planning consider the sequence, not just the finished condition?
Intermediate stages can remove supports or change load paths before the final stable condition is reached.
The installed support matches drawing revision A, but the designer has issued revision B. What evidence is missing before the manager can rely on it?
The competent process must establish which revision applies, what changed and whether the installed arrangement is acceptable or needs alteration. Record the decision and any required verification, then communicate the conditions of use. Matching an obsolete drawing does not answer whether the current requirements are met.
A temporary-works register contains a drawing number and an installer’s name. What further management information would help control the arrangement?
Its location and intended use, the applicable revision, responsible design and coordination roles, relevant checking and installation verification, status and conditions of use, outstanding actions and how changes or removal are authorised. These are useful management prompts, not a universal statutory form.
A permanent structure will be stable when an alteration is finished. Why does that not justify removing temporary support early?
Loads and stability can differ at intermediate stages. The competent sequence must establish when support can change or be removed and what conditions must first be met. The final drawing does not prove the partly completed structure can carry the same loads.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: Controlling the design, installation, use and removal of a support arrangement. Temporary works require control through every stage, including changes and removal.
- Only whether the structure is used for less than a month — Duration does not determine the need for safe design and management.
- Only whether the materials will be reused — Reuse is not the defining safety issue.
- Only the final appearance of the permanent structure — Intermediate support and stability also matter.
- Controlling the design, installation, use and removal of a support arrangement — Correct: the whole lifecycle needs suitable management.
Show answer and explanation
Answer: It can change structural stability and load paths. A physical obstruction is not a reason to improvise changes to an engineered support.
- The delivery driver can approve the change — Convenience does not establish the relevant competence or authority.
- A general site induction authorises structural changes — Induction does not provide design approval.
- It can change structural stability and load paths — Correct: the effect must be assessed before the arrangement changes.
- Every short removal is automatically harmless — Duration does not establish structural adequacy.
Show answer and explanation
Answer: Suitable authority and competence are needed for the role. Coordination is a management function that connects, rather than replaces, the required technical work.
- The role removes every contractor’s duty — Organisations and people retain relevant responsibilities.
- Suitable authority and competence are needed for the role — Correct: the title must be backed by capability and a functioning process.
- The title alone proves every design is correct — Design and checking still require appropriate competence.
- Anyone with SMSTS can design all temporary works — SMSTS does not establish specialist design competence.
Show answer and explanation
Answer: The structure’s stability and a suitable sequence, Services, hazardous materials and effects on neighbouring structures. Planning must use information about this structure and the work that will change it.
- The structure’s stability and a suitable sequence — Correct: intermediate stages must be considered.
- Services, hazardous materials and effects on neighbouring structures — Correct: these affect safe planning.
- Only how quickly the rubble can be removed — Programme speed alone does not establish safety.
- That previous buildings on the street were demolished without incident — Anecdotes do not establish this structure’s condition.
18. Confined-space recognition, entry and rescue
Recognise a confined-space risk and explain why entry and rescue require planned specialist arrangements.
4 practice questions
- Recognise a confined-space risk and explain why entry and rescue require planned specialist arrangements.
- Explain the worked example and check your understanding with the questions.
A confined space is enclosed or largely enclosed and has a reasonably foreseeable specified risk, such as fire, explosion, loss of consciousness, asphyxiation or drowning. Size alone does not decide it: a large chamber can qualify, while a cramped place without the relevant risk may not. The assessment must consider the space, its contents, connected systems and the work that could introduce hazards. [54]
The first question is whether the work can be done without entering. If entry cannot be avoided, competent assessment and a suitable safe system must address the actual risks. Possible considerations include isolation of incoming substances or energy, atmospheric conditions, ventilation, access, equipment, communications and the people needed. A permit can be part of the control system but cannot make an unsuitable atmosphere safe on its own. [54] [48]
Conditions can change while work is underway. Work processes may consume oxygen or introduce fumes, and connected systems can create unexpected inflow. An earlier observation, open hatch or lack of smell cannot prove continued safety. The monitoring and control arrangements need to match the assessed risk, implemented by people competent for the work. [54]
Emergency arrangements must be in place before entry and suited to the space and task. A rescue plan needs the appropriate trained people, equipment, communications and method; merely having a phone or relying on an unplanned response from emergency services is insufficient. Unplanned rescue entry can expose a second person to the same atmosphere or other hazard. Raise the alarm and use the established response.
Key points to remember
- Enclosure plus a foreseeable specified risk defines the issue, not small size alone.
- Avoid entry where practicable.
- Entry planning and rescue planning must be ready before the task starts.
Know these terms
- Asphyxiation
- A life-threatening lack of sufficient oxygen reaching the body.
- Permit to work
- A controlled authorisation process for specified work and conditions; it does not replace the underlying safe system.
The open hatch
A chamber’s hatch is open and the air appears clear. A worker proposes a quick entry to retrieve equipment without using the planned entry arrangements.
Why it matters: An open hatch and clear appearance do not establish the atmosphere or other risks. Reconsider whether retrieval can avoid entry; if entry is needed, use the competent assessed system and rescue arrangements. “Only a minute” does not remove the possibility of rapid incapacitation.
Common misunderstanding: A confined space must be too small to stand upright.
Remember: A large enclosed space can present the specified risks.
Common misunderstanding: No smell means the atmosphere is safe.
Remember: Dangerous atmospheres may not be detected by smell or sight.
Recall it without looking
Say or write your answer first, then open the explanation.
Why is a phone number alone not a confined-space rescue plan?
It does not provide the suitable people, equipment, access and method needed to rescue without creating additional casualties.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: An enclosed or largely enclosed space with a foreseeable specified risk. Assess the space and foreseeable hazards, not just its dimensions.
- Only a space with no door — Access design alone does not establish the definition.
- Only a place where someone has already collapsed — The risk must be recognised before harm.
- An enclosed or largely enclosed space with a foreseeable specified risk — Correct: both enclosure and relevant risk matter.
- Any room with a low ceiling — Size alone does not define the risk.
Show answer and explanation
Answer: Whether the task can be completed without entry. Avoid entry before designing the arrangements for unavoidable entry.
- Whether there is no unusual smell — Smell is not a reliable safety test.
- Whether the task can be completed without entry — Correct: avoiding entry removes that exposure where practicable.
- Which worker can fit through the opening fastest — Speed does not address the risk.
- Whether the hatch has been open for ten minutes — Time open does not establish safe conditions.
Show answer and explanation
Answer: It records and controls authorisation but cannot physically control every hazard. Authorisation must reflect a functioning safe system, not substitute for one.
- It records and controls authorisation but cannot physically control every hazard — Correct: the underlying measures must be suitable and implemented.
- Permits are never useful — A permit can be valuable as part of the safe system.
- A signature guarantees the atmosphere will never change — Conditions can change and need appropriate control.
- The permit replaces competent rescue arrangements — Rescue planning remains necessary.
Show answer and explanation
Answer: A communicated and practised method with appropriate alarm arrangements, Trained people and equipment suited to the space and task. Rescue is part of the planned operation and must not depend on improvisation.
- A communicated and practised method with appropriate alarm arrangements — Correct: people need to know how the response works.
- An untrained colleague ready to enter immediately — That can create another casualty.
- Only the emergency-services telephone number — A number alone does not establish the necessary rescue capability.
- Trained people and equipment suited to the space and task — Correct: the response must be practicable.
19. Fire prevention and emergency planning
Connect ignition and fuel control with escape, warnings and a workable emergency response.
5 practice questions
- Connect ignition and fuel control with escape, warnings and a workable emergency response.
- Explain the worked example and check your understanding with the questions.
Fire requires fuel, an ignition source and oxygen. Site prevention starts with identifying where combustible materials or dangerous substances could meet ignition, including hot work, electrical faults and smoking. Reduce unnecessary combustible storage, keep waste controlled and arrange suitable handling and storage of flammable substances. DSEAR addresses risks from dangerous substances that can cause fire, explosion or similar energetic events. [55]
A fire-risk assessment also informs warning, escape and response. Routes and exits must remain usable as the building and site change; work in an occupied building must not compromise the existing occupants’ fire protection. The manager should coordinate temporary openings, altered routes, fire separation, alarms and access for emergency services. The general fire-safety law differs between UK jurisdictions; the Fire Safety Order applies in England and Wales. [56]
Hot-work control can include considering a suitable cold method, managing nearby combustible material, protecting adjacent or hidden areas and arranging appropriate fire checks. A permit records the agreed authorisation and conditions; it does not remove the ignition source or perform the checks. Follow the assessed permit and monitoring arrangements rather than inventing one universal fire-watch duration. [56] [55]
Emergency planning covers more than fire: serious injury, collapse, flood, electrical events or chemical release may need different actions. Establish alarms, roles, communication, access, first-aid arrangements and support for everyone present. Practise relevant responses and review them when the layout, workforce or shift changes. An emergency contact list is useful but does not prove that people can hear an alarm, escape or obtain help. [36]
First-aid provision follows a needs assessment covering the work hazards, workforce, location, work patterns and access to help. Arrange appropriate equipment, facilities and personnel for all working periods, including shift changes and absences. An appointed person can take charge of the arrangements and call for help; the title does not make that person a trained first aider. Where the assessment requires trained first aiders, provide sufficient suitably trained cover. Inform workers how to obtain assistance and check the arrangements still work when activities, staffing or hours change. [57]
Key points to remember
- Prevent ignition and control fuel as well as planning evacuation.
- A changed layout can invalidate escape and response arrangements.
- A permit supports a controlled task; the actual controls must be in place.
Know these terms
- DSEAR
- Dangerous Substances and Explosive Atmospheres Regulations 2002 in Great Britain.
- Hot work
- Work involving a source of heat, flame or sparks that may ignite materials in the surroundings.
The new partition blocks escape
A temporary partition improves work separation but closes the escape route used by another contractor.
Why it matters: Coordinate the proposed partition with the fire and emergency arrangements before relying on it. A control for one activity must not create an unplanned barrier to escape for another group. Establish an appropriate alternative arrangement, communicate it and check it in the actual layout.
Common misunderstanding: Signing a hot-work permit makes the area safe.
Remember: The permit must reflect implemented controls and the required checks; the signature cannot prevent ignition.
Recall it without looking
Say or write your answer first, then open the explanation.
Name three things to check after a site-layout change.
For example, escape routes, alarm coverage and emergency-service access. Assembly, headcount and first-aid arrangements may also be affected.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: Fuel, ignition or heat, and oxygen. Understanding the combustion conditions helps identify prevention opportunities.
- Fuel, a naked flame and a permit — Ignition need not be a naked flame, and a permit is not the oxygen element.
- Fuel, ignition or heat, and oxygen — Correct: removing or controlling these conditions supports prevention.
- Fuel, heat and a closed compartment — Enclosure can influence fire development, but it is not the third element of the fire triangle.
- Fuel, oxygen and a fire extinguisher — An extinguisher is a control resource, not the ignition or heat element.
Show answer and explanation
Answer: The work must be coordinated so existing fire protection and escape remain effective. Assess how a site change affects everyone relying on the existing arrangements.
- The work must be coordinated so existing fire protection and escape remain effective — Correct: construction arrangements must account for other occupants.
- The enclosure is temporary, so escape can wait — Temporary changes can still create serious danger.
- Only the construction crew’s route matters — Other occupants can be affected by the work.
- A sign on the blocked exit provides equivalent escape — A sign cannot create a usable route.
Show answer and explanation
Answer: Monitoring must fit the assessed work, materials and permit arrangements. Use task-specific assessment and the agreed conditions instead of an unsupported universal rule.
- Fire checks are never needed after hot work — Residual ignition risk may need monitoring.
- A signature eliminates hidden ignition risks — The actual conditions and controls still matter.
- A fixed period is sufficient whenever the same tool is used — The surroundings, materials and task conditions can change the monitoring needed.
- Monitoring must fit the assessed work, materials and permit arrangements — Correct: one duration cannot be assumed suitable for every task.
Show answer and explanation
Answer: People know the alarm, roles and escape arrangements, Access and support remain available during the actual shift. The plan needs people, communication and physical arrangements that work together.
- Only a list of telephone numbers — Contacts are not a complete response plan.
- A route diagram that is never checked after changes — An outdated route may not function.
- People know the alarm, roles and escape arrangements — Correct: the response must be understood.
- Access and support remain available during the actual shift — Correct: the plan must fit operating conditions.
Show answer and explanation
Answer: Provide suitable trained cover and other assessed arrangements for the evening work. Match personnel, equipment, information and access to help to the actual working period, including absence and shift cover.
- Rely on an untrained appointed person because the titles mean the same thing — An appointed person is not automatically a trained first aider.
- Treat the daytime assessment as covering all later working hours automatically — Different work periods and staffing can leave the assessed provision unavailable.
- Provide suitable trained cover and other assessed arrangements for the evening work — Correct: arrangements need to be appropriate and available throughout the work.
- Add the emergency phone number to the sign-in sheet without checking any other provision — A number alone does not provide the trained cover required by the stated assessment.
20. Environmental controls, waste and pollution
Plan materials and drainage to prevent pollution and manage waste responsibly.
4 practice questions
- Plan materials and drainage to prevent pollution and manage waste responsibly.
- Explain the worked example and check your understanding with the questions.
Environmental management starts before waste or pollution occurs. Order and store materials to reduce damage and surplus; consider suitable reuse before recycling, recovery and disposal. A labelled skip is only one part of the process. People need to know what can enter it, how incompatible or hazardous material is kept separate and who checks collection arrangements. [58]
In England, business waste responsibilities include safe storage, appropriate transfer documentation and checks that those taking the waste are authorised. Hazardous waste has additional requirements. Do not assume that a cheap collection or a verbal assurance completes the producer’s responsibilities. Requirements and regulators differ across the UK nations; use the guidance for the location rather than applying one nation’s paperwork rules everywhere. [58]
Pollution prevention includes identifying drainage routes, storage locations and potential pathways into water or ground. Surface-water drains may lead directly to the environment. Concrete wash-water, fuels, oils and other liquids must not be treated as harmless because they can be diluted or are not visibly oily. Plan suitable containment, transfer and authorised disposal arrangements before the task. [59]
A spill response needs known responsibilities, appropriate resources and competent action. Protect people first, raise the alarm through the site procedure and prevent further spread where it is safe and within competence to do so. Do not improvise chemical treatment or wash contamination into a drain. Record the event and review the source of the failure, such as unsuitable storage or an uncontrolled transfer point.
Key points to remember
- Prevent waste before relying on collection and disposal.
- Know where drains lead before planning liquid-handling work.
- Waste and pollution rules depend on the UK nation and type of material.
Know these terms
- Waste hierarchy
- The priority order of prevention, preparation for reuse, recycling, other recovery and disposal.
- Pollution pathway
- A route by which a substance can reach people or the environment, such as a drain or unprotected ground.
The convenient drain
A subcontractor proposes washing concrete residue into the nearest drain because the water will dilute it.
Why it matters: Establish what the drain connects to and use the agreed washout and disposal arrangements. Dilution does not authorise discharge or remove the potential for harm. The manager should arrange a suitable location and containment before washing begins, then check that the crew can use it.
Common misunderstanding: A registered collector removes every waste responsibility from the producer.
Remember: The producer must still meet relevant duty-of-care requirements and use suitable documentation and checks.
Common misunderstanding: Diluting a pollutant makes drain disposal acceptable.
Remember: Dilution is not permission to discharge; the pathway and applicable controls matter.
Recall it without looking
Say or write your answer first, then open the explanation.
Give an example of preventing waste rather than recycling it.
Ordering suitable quantities or dimensions so fewer materials are damaged or cut off before use.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: Preventing unnecessary material from becoming waste. The best point to reduce waste is often procurement, design or storage before it is generated.
- Preventing unnecessary material from becoming waste — Correct: prevention comes before downstream treatment.
- Sending all material to landfill — Disposal is the last option in the hierarchy.
- Mixing reusable material with contaminated waste — This can reduce recovery options and create further problems.
- Choosing the largest skip available — Skip size alone does not prevent waste.
Show answer and explanation
Answer: It may provide a direct pollution route to water or ground. Drainage information is part of prevention, not a detail to discover after a spill.
- Every drain goes to a treatment plant — That assumption is unsafe.
- Dilution automatically authorises any discharge — Discharge requirements do not disappear through dilution.
- Only visibly coloured liquids can pollute — Appearance does not establish environmental harm.
- It may provide a direct pollution route to water or ground — Correct: the pathway determines who or what could be affected.
Show answer and explanation
Answer: The producer must use the relevant checks and documentation for the waste and location. Use the applicable duty-of-care process rather than assuming collection alone completes it.
- A verbal assurance always replaces transfer records — Required documentation cannot simply be replaced by a promise.
- All UK nations use identical procedures for every waste type — Requirements and regulators differ.
- The producer must use the relevant checks and documentation for the waste and location — Correct: duties depend on the applicable rules and material.
- Any collector with a van is authorised — Authorisation needs verification.
Show answer and explanation
Answer: Choose suitable containment and storage locations, Identify drainage and establish the spill-response responsibilities. Prevention connects the material, storage, pathways and planned response.
- Wait for the first spill before deciding who responds — Response arrangements should exist in advance.
- Choose suitable containment and storage locations — Correct: these reduce escape and spread.
- Identify drainage and establish the spill-response responsibilities — Correct: people need to know pathways and actions.
- Plan to wash every spill into the nearest drain — That can spread pollution.
21. Lone work, out-of-hours tasks and driving
Assess what changes when a worker is separated from help or travelling for work.
4 practice questions
- Assess what changes when a worker is separated from help or travelling for work.
- Explain the worked example and check your understanding with the questions.
A lone worker works without close or direct supervision. Someone can be effectively alone on a large site even when other people are elsewhere. The important question is how the person can work safely and obtain help, taking account of the task, location, individual needs and foreseeable emergencies. Some work cannot be safely done alone. [60]
Plan suitable training, supervision and monitoring, with agreed contact intervals and a response when contact is missed. The arrangement must be tested against real conditions: a mobile phone with no signal is not a reliable communication method. Check access, violence or security concerns, first aid, welfare and the ability of others to reach the worker. Avoid assuming that a general daytime procedure covers isolated evening work. [60] [36]
Driving for work is a work activity. Manage the journey, driver or rider and vehicle together, including route, weather, time pressure, fatigue, vehicle condition and suitability. Travel between workplaces or to a work activity can create risks that the site programme must account for. A deadline that encourages speeding or a long drive after an exhausting shift is a management issue, not only a driver choice. [37]
A useful plan names who checks the worker’s return or contact, what triggers an alert and what help is available. For a journey, it should allow realistic time and suitable breaks and avoid unnecessary travel where feasible. Reassess when work overruns or conditions change, rather than treating the original itinerary as a guarantee of safe completion.
Key points to remember
- Being on a busy project does not guarantee nearby help.
- A missed-contact procedure needs a real response owner.
- Driving risk includes the journey, person and vehicle.
Know these terms
- Lone working
- Working without close or direct supervision, including isolation within a larger workplace.
- Monitoring arrangement
- A planned method of checking a worker’s status and responding when expected contact is missed.
An isolated evening visit
A technician is asked to inspect a remote area after the main crew leaves. The area has poor phone reception and the usual first aider has finished.
Why it matters: Assess whether the work is suitable for lone working and establish reliable communication, supervision and emergency support. Change the timing or staffing if necessary. A mobile phone listed in the method does not solve the known reception problem, and the daytime arrangements no longer match the task.
Common misunderstanding: A mobile phone is a complete lone-working system.
Remember: It needs reliable operation, agreed contact and an effective response; the task may require additional measures or another person.
Recall it without looking
Say or write your answer first, then open the explanation.
What three elements should be considered for driving-for-work risk?
The journey, the driver or rider, and the vehicle, including how programme pressure and fatigue affect them.
Practise this topic
Apply the notes to these original questions. Read the explanation even when your answer is correct.
Show answer and explanation
Answer: A worker isolated from close supervision and immediate help in a remote part of a large site. Assess supervision and access to help, not simply whether anyone else is on the project.
- Only someone who is self-employed — Employment status does not define lone working.
- Only work outside normal office hours — Lone work can occur during the day.
- Only work outside a building — Indoor workers can also be isolated.
- A worker isolated from close supervision and immediate help in a remote part of a large site — Correct: other people elsewhere do not guarantee assistance.
Show answer and explanation
Answer: Nobody is assigned to respond when expected contact is missed. A scheduled call without an owner and escalation response is not a complete monitoring system.
- Communication coverage has been checked — This supports reliability.
- The task has been assessed for lone-working suitability — That is an essential planning step.
- Nobody is assigned to respond when expected contact is missed — Correct: monitoring needs an action when something is wrong.
- The worker knows when to make contact — That is useful but must connect to a response.
Show answer and explanation
Answer: Fatigue, realistic timing and safer travel or work arrangements. The journey, person and vehicle must be considered together with how work is scheduled.
- Only whether the destination has parking — Parking is one detail, not the whole risk.
- Fatigue, realistic timing and safer travel or work arrangements — Correct: the schedule contributes to driving risk.
- Only whether the employee owns the car — Ownership does not resolve work-driving risk.
- That site duties ended, so the work journey has no relevance — Work-related driving remains a work activity.
Show answer and explanation
Answer: Reliable communication and an effective missed-contact response, Suitable emergency support, welfare and access for the actual period. The plan must match the actual time, place, task and support available.
- Reliable communication and an effective missed-contact response — Correct: these support timely help.
- Suitable emergency support, welfare and access for the actual period — Correct: daytime facilities may not remain available.
- Only that the same task was done in daylight — Conditions and available support may differ.
- Only that the worker is willing to go alone — Willingness does not establish a safe arrangement.
Take your revision offline
Download the teaching notes or practise without seeing the answers first. Both packs contain original material from this page and primary-source references.
Revision notes
All 21 topics, key terms, worked examples and recall checks in one print-friendly pack.
Download notes (PDF)Practice questions and answers
91 questions organised by topic. Explained answers are in a separate section so you can test yourself first.
Download questions (PDF)Check your course and assessment arrangements
For the full SMSTS course, the current CITB Appendix G requires completion of four core exercises, a passed trainer review and a passed examination. The exam has 25 questions worth 32 marks: 18 single-answer multiple-choice items and seven multi-response or short written-answer items worth two marks each. The pass mark is 26/32 and the time allowed is 35 minutes. GE700 and the XA6 delegate workbook may be used in the final 15 minutes. [61]
SMSTS-R has its own rules in Appendix H. Its examination also has 25 questions, 32 available marks, a 26-mark pass and 35 minutes, with GE700 permitted in the final 15 minutes. Do not import the full course’s four-exercise and trainer-review route into refresher preparation. Confirm current joining, publication and assessment arrangements with your provider. [62]
The questions here are original, independent learning activities. Topic practice is untimed and does not reproduce official papers, official mark weighting or protected course exercises. Use the explanations to identify what you understand and what needs more work, alongside your supplied course materials. A practice score is not a certificate or a prediction of passing.
Use your results to choose what to revisit. Practice scores are not an official pass or a prediction of one.
Plan your next revision session
Pick one topic, explain the main idea without looking, then answer its practice questions. Revisit incorrect answers after studying the explanation. Use your saved topics and downloaded review to decide what comes next.
Open the optional seven-day planner
SMSTS revision questions
What should I revise for SMSTS?
Work through legal duties and management, health and welfare, general site safety and high-risk activities. These notes cover the main public learning-outcome areas, with additional environmental and demolition context. Choose a topic you cannot yet explain, study its notes and answer its practice questions before returning to mixed practice.
Are these actual SMSTS revision notes or just study tips?
These are original topic notes with definitions, worked examples, common misunderstandings and questions with explained answers. You can learn and practise on the page. Study planning is supplementary; it does not replace the teaching material.
Are the questions official CITB exam questions?
No. They are independently written practice questions. They do not reproduce a live exam or protected course exercises, and their distribution does not represent official topic weighting.
Can I revise without taking a whole mock test?
Yes. Pick one topic, read its notes and answer the short practice set. Explain the recall prompt without looking, then compare your reasoning with the answer. Use the separate full mock when you want a mixed practice session.
Which books are used on the full course and refresher?
The reviewed full-course Appendix G specifies GE700 and the XA6 delegate workbook. Refresher Appendix H specifies GE700. Ask your provider which current editions and access arrangements they supply. These free original notes supplement those materials.
What is the SMSTS examination pass mark?
The reviewed CITB full-course and refresher appendices specify 26 marks out of 32, with 25 questions and 35 minutes. Other course requirements also apply. The learning questions on this page use independent practice scoring, so their result is not the official assessment result.
Should refresher delegates use the same notes?
The broad topic areas are shared. Returning delegates can use the questions to identify uncertain or outdated assumptions, then check current source and provider guidance. Refresher eligibility and assessment arrangements remain separate from the full course; revision does not extend certificate validity.
How can I tell whether I understand a topic?
Explain the principle without looking, apply it to a changed situation and explain why the other answer choices are weaker. If you only recognise a repeated answer, revisit the notes and a different example. A correct guess is still worth reviewing.
Can these notes qualify me to design temporary works or plan specialist lifting?
No. These notes develop management understanding. Specialist design, planning, inspection and task work require the relevant competence, authority and project-specific arrangements.
Do these legal notes apply throughout the UK?
The HSE legal guidance used here generally concerns Great Britain. Northern Ireland has separate legislation. Waste, pollution and general fire-safety rules also differ by nation, so use the source and regulator appropriate to the project location.